feat: initial commit

Initial commit including source code, readme, and license.

heartbeat.yaml

@@ -0,0 +1,99 @@
+substitutions:
+  name: "heartbeat60hz"
+  friendly_name: "60Hz Heartbeat Presence"
+
+esphome:
+  name: "${name}"
+  friendly_name: "${friendly_name}"
+  name_add_mac_suffix: true
+  project:
+    name: "seeedstudio.mr60bha2_kit"
+    version: "3.5"
+  platformio_options:
+    board_upload.maximum_size: 4194304
+  min_version: "2024.3.2" # Fix logger compile error on ESP32-C6 esphome#6323
+
+esp32:
+  board: esp32-c6-devkitc-1
+  variant: esp32c6
+  flash_size: 4MB # upload.flash_size
+  framework:
+    type: esp-idf
+
+external_components:
+  - source:
+      type: git
+      url: https://github.com/limengdu/MR60BHA2_ESPHome_external_components
+      ref: main
+    components: [seeed_mr60bha2]
+    refresh: 0s
+
+# Enable logging
+logger:
+  hardware_uart: USB_SERIAL_JTAG
+  # level: DEBUG
+
+# Enable Home Assistant API
+api:
+  reboot_timeout: 0s
+  encryption:
+    key: !secret api_encryption_key
+
+# Enable OTA updates
+ota:
+  - platform: esphome
+    password: !secret ota_password
+
+# Enable IPv6 (for OpenThread)
+network:
+  enable_ipv6: true
+
+# OpenThread communication
+openthread:
+  tlv: !secret thread_tlv
+
+light:
+  - platform: esp32_rmt_led_strip
+    id: led_ring
+    name: "60Hz Sensor RGB Light"
+    pin: GPIO1
+    num_leds: 1
+    rgb_order: GRB
+    chipset: ws2812
+
+i2c:
+  sda: GPIO22
+  scl: GPIO23
+  scan: true
+  id: bus_a
+
+uart:
+  id: uart_bus
+  baud_rate: 115200
+  rx_pin: 17
+  tx_pin: 16
+  parity: NONE
+  stop_bits: 1
+
+seeed_mr60bha2:
+  id: my_seeed_mr60bha2
+
+binary_sensor:
+  - platform: seeed_mr60bha2
+    has_target:
+      name: "Person Information"
+
+sensor:
+  - platform: bh1750
+    name: "60Hz Sensor Illuminance"
+    address: 0x23
+    update_interval: 1s
+  - platform: seeed_mr60bha2
+    breath_rate:
+      name: "Real-time respiratory rate"
+    heart_rate:
+      name: "Real-time heart rate"
+    distance:
+      name: "Distance to detection object"
+    num_targets:
+      name: "Target Number"