rootiest
c93249f1b2
Enable KEYCHRON_RGB_ENABLE for the Q5 Max, wiring up PER_KEY_RGB and MIXED_RGB effects, and fix a cascade of EEPROM bugs that caused the Launcher-configured RGB mode to revert to the default heatmap on every power cycle and wireless transport change. Keychron RGB enablement: - Add KEYCHRON_RGB_ENABLE = yes to rules.mk - Define default_per_key_led[] and default_region[] for the ANSI Encoder layout in ansi_encoder.c (extern'd by keychron_rgb.c) - Fix missing #include "eeconfig_custom_rgb.h" in mixed_rgb.c and rgb_matrix_kb.inc so EECONFIG_SIZE_CUSTOM_RGB is in scope for the compile guards that gate the custom effects - Add #undef EECONFIG_KB_DATA_SIZE before the Keychron redefinition in eeconfig_kb.h to suppress redefinition of QMK's default-zero value EEPROM persistence fixes (keychron_rgb.c): - Fix retail_demo_enable never being written to EEPROM in eeconfig_reset_custom_rgb(): original code used eeprom_read_block instead of eeprom_update_block, leaving 0xFF on freshly-flashed boards; retail_demo_task() treats any non-zero value as "demo active" and forces the mode to CUSTOM_MIXED_RGB every scan - Clamp retail_demo_enable > 1 to 0 on load to recover boards already affected by the above bug - Move EECONFIG_KEYBOARD version stamp from eeconfig_init_custom_rgb() (load path) to eeconfig_reset_custom_rgb() (reset/write path) so the version is only stamped when valid defaults are actually written - Call eeconfig_update_rgb_matrix() in kc_rgb_save() so the current QMK RGB mode is persisted alongside Keychron data; without this, rgb_matrix_init() (called on every transport change) reloads the compile-time default RGB_MATRIX_TYPING_HEATMAP from EEPROM Transport-change persistence (q5_max.c): - Call eeconfig_init_custom_rgb() in keyboard_post_init_kb() so Keychron RGB arrays are loaded from EEPROM on every boot instead of being zero-initialised - Add wireless_enter_connected_kb() hook: re-applies the EEPROM-saved QMK RGB mode after BT/2.4G reconnect in case the reconnect sequence resets the in-RAM mode before the display settles DIP switch Win-side override (keymap.c): - Replace rgb_matrix_mode() / rgb_matrix_sethsv() calls (which write to EEPROM and permanently overwrite the Launcher mode) with a dip_win_active flag; rgb_matrix_indicators_advanced_user() paints all LEDs white each frame when the flag is set, leaving the active effect and EEPROM untouched VIA keymap address pinning (config.h): - Define VIA_EEPROM_MAGIC_ADDR 544 to anchor VIA keymap storage at a fixed EEPROM offset; without this, growth in EECONFIG_KB_DATA_SIZE silently shifts the keymap block, corrupting stored layouts (observed as layer-0 keys reverting to KC_TRNS / KC_NONE on boot)
61 lines
2.2 KiB
C
61 lines
2.2 KiB
C
/* Copyright 2024 @ Keychron (https://www.keychron.com)
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#ifdef RGB_MATRIX_ENABLE
|
|
/* RGB Matrix driver configuration */
|
|
# define RGB_MATRIX_LED_COUNT 101
|
|
# define DRIVER_COUNT 2
|
|
# define DRIVER_CS_PINS {B8, B9}
|
|
|
|
/* Set LED driver current */
|
|
# define SNLED27351_CURRENT_TUNE {0x2C, 0x2C, 0x2C, 0x2C, 0x2C, 0x2C, 0x2C, 0x2C, 0x2C, 0x2C, 0x2C, 0x2C}
|
|
|
|
/* Set to infinit, which is use in USB mode by default */
|
|
# define RGB_MATRIX_TIMEOUT RGB_MATRIX_TIMEOUT_INFINITE
|
|
/* Allow shutdown of led driver to save power */
|
|
# define RGB_MATRIX_DRIVER_SHUTDOWN_ENABLE
|
|
/* Turn off backlight on low brightness to save power */
|
|
# define RGB_MATRIX_BRIGHTNESS_TURN_OFF_VAL 32
|
|
|
|
/* Indications */
|
|
# define NUM_LOCK_INDEX 32
|
|
# define CAPS_LOCK_INDEX 55
|
|
# define LOW_BAT_IND_INDEX {92}
|
|
|
|
# define RGB_MATRIX_KEYPRESSES
|
|
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
|
|
|
|
/* Default lighting effect */
|
|
# define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_TYPING_HEATMAP
|
|
|
|
#endif
|
|
|
|
// Pin VIA keymap storage to a fixed EEPROM address. By default VIA places its
|
|
// magic/keymap block immediately after EECONFIG_KB_DATA_SIZE, so any growth in
|
|
// the Keychron custom-RGB EEPROM region shifts the keymap silently and corrupts
|
|
// the stored layout (observed as layer 0 keys reverting to KC_TRNS on boot).
|
|
// 544 is past the current Keychron data region and leaves headroom for further
|
|
// EEPROM additions without requiring another VIA reset.
|
|
#define VIA_EEPROM_MAGIC_ADDR 544
|
|
|
|
/* Number of layers */
|
|
#define DYNAMIC_KEYMAP_LAYER_COUNT 6
|
|
|
|
/* Number of taps to toggle layer with TT */
|
|
#define TAPPING_TOGGLE 3
|