diff --git a/BOM.md b/BOM.md index 0087b42..7e74736 100644 --- a/BOM.md +++ b/BOM.md @@ -297,142 +297,208 @@ ## Printed Parts -| Category | Name | Count | Color | Material | Notes | | -| --- | --- | --- | --- | --- | --- | --- | -| Tools and Guides - Frame Drilling | drill_jig_frame_base_corners | 1 | N/A | PLA | Only needed if self drilling frame | [pp-p] for printed part, primary color | -| | drill_jig_frame_base_gantry | 1 | N/A | PLA | Only needed if self drilling frame | [pp-s] for printed part, secondary color | -| | drill_jig_frame_base_rails | 1 | N/A | PLA | Only needed if self drilling frame | [pp-c] for printed part, clear PETG | -| | drill_jig_gantry_frame_left | 1 | N/A | PLA | Only needed if self drilling frame | [mp-a] for a machined part, aluminum | -| | drill_jig_gantry_frame_right | 1 | N/A | PLA | Only needed if self drilling frame | [sp-o] for an opaque panel, structural / safety | -| | | | | | | [sp-c] for a clear panel, structural / safety | -| Tools and Guides - Panel Drilling | drill_template_60mm_fan | 1 | N/A | PLA | Only needed if self cutting panels | [ep-o] for an opaque panel used for an enclosure, non-structural | -| | drill_template_60mm_fan_with_keystones | 1 | N/A | PLA | Only needed if self cutting panels | [ep-c] for a clear panel used for an enclosure, non-structural | -| | drill_template_display_mount | 1 | N/A | PLA | Only needed if self cutting panels | | -| | drill_template_power_inlet | 1 | N/A | PLA | Only needed if self cutting panels | | -| Tools and Guides - Assembly & Alignment | 1204_screw_clamp_A | 1 | N/A | PLA | | | -| | 1204_screw_clamp_B | 1 | N/A | PLA | | | -| | alignment_guide_2020_mgn15 | 2 | N/A | PLA | | | -| | alignment_guide_3030_mgn15 | 2 | N/A | PLA | | | -| | alignment_guide_3060_mgn15 | 2 | N/A | PLA | | | -| | alignment_tool_x_axis | 1 | N/A | PLA | | | -| | alignment_tool_y_axis | 1 | N/A | PLA | | | -| | alignment_tool_y_drive | 1 | N/A | PLA | | | -| | ballscrew_1204_maint_tool | 1 | N/A | PLA | | | -| | setup_tool_z | 1 | N/A | PLA | | | -| | tramming_bar | 1 | N/A | PLA | | | -| Core Frame and Drive | x_endstop_mount_long_body | 1 | accent | ABS | Choose 1 of 4 (no 3d probe, long sensor) | | -| | x_endstop_mount_short_body | 1 | accent | ABS | Choose 1 of 4 (no 3d probe, short sensor) | | -| | x_endstop_probe_mount_long_body | 1 | accent | ABS | Choose 1 of 4 (3d probe, long sensor) | | -| | x_endstop_probe_mount_short_body | 1 | accent | ABS | Choose 1 of 4 (3d probe, short sensor) | | -| | x_endstop_trigger_mount | 1 | accent | ABS | | | -| | z_carriage_cover_air_mount | 1 | accent | ABS | Choose 1 of 2 | | -| | z_carriage_cover_blank | 1 | accent | ABS | Choose 1 of 2 | | -| | z_drive_belt_guard | 1 | accent | ABS | | | -| | z_drive_mount | 1 | accent | ABS | | | -| | z_drive_mount_cover | 1 | accent | ABS | | | -| | z_endstop_clamp | 1 | accent | ABS | | | -| | 3030_m6_nut_carrier | 1 | primary | ABS | | | -| | frame_cable_routing_cover | 1 | primary | ABS | | | -| | frame_endstop_cable_guide | 1 | primary | ABS | | | -| | gantry_chain_mount | 1 | primary | ABS | | | -| | rail_stop_20mm | 2 | primary | ABS | | | -| | sexbolt_debris_shield_extrusion | 1 | primary | ABS | Choose 1 of 2 | | -| | sexbolt_debris_shield_grid | 1 | primary | ABS | Choose 1 of 2 | | -| | tool_setter_cable_guide_OPTIONAL | 1 | primary | ABS | Only if using above table tool setter | | -| | tool_setter_under_mount_extrusion | 1 | primary | ABS | Choose 1 of 2, only for under table tool setter | | -| | tool_setter_under_mount_grid | 1 | primary | ABS | Choose 1 of 2, only for under table tool setter | | -| | x_ballscrew_block_mount | 1 | primary | ABS | | | -| | x_motor_mount | 1 | primary | ABS | | | -| | x_spacer_washer_guide | 1 | primary | ABS | | | -| | y_endstop_mount_long_body | 1 | primary | ABS | Choose 1 of 2 | | -| | y_endstop_mount_short_body | 1 | primary | ABS | Choose 1 of 2 | | -| | y_motor_mount | 1 | primary | ABS | | | -| | y_motor_tension_block | 1 | primary | ABS | | | -| Electrical | air_inlet_cover_hex | 1 | accent | ABS | | | -| | air_inlet_cover_mount_ring | 1 | accent | ABS | | | -| | fan_cover_keystone_hex | 1 | accent | ABS | | | -| | fan_cover_mount_plate | 1 | accent | ABS | | | -| | keystone_blank | 2 | accent | ABS | | | -| | daylight_cover | 1 | clear | PETG | | | -| | DIN Clips | 1 | primary | ABS | | | -| | IRM-30-XXST_din_mount | 2 | primary | ABS | | | -| | WAGO_221-415_3x5_2020mount | 1 | primary | ABS | | | -| | WAGO_221-415_2x5-2020mount | 2 | primary | ABS | | | -| | cable_mount_20mm | 8 | primary | ABS | | | -| | flexihal_DIN_mount_pair | 1 | primary | ABS | Only if using FlexiHAL controller | | -| | scylla_DIN_mount_pair | 1 | primary | ABS | Only if using Scylla controller | | -| | lrs_350_saddle_mount | 2 | primary | ABS | Only if using LRS 350 48V power supply | | -| | se_600_mount_A | 1 | primary | ABS | Only if using SE600 48V power supply | | -| | se_600_mount_B | 1 | primary | ABS | Only if using SE600 48V power supply | | -| | pi_mount_2020 | 1 | primary | ABS | | | -| | power_inlet_panel_mount_ring | 1 | primary | ABS | | | -| | power_inlet_panel_powercon | 1 | primary | ABS | | | -| Workspace Enclosure | 3030_enclosure_panel_clip | 6 | accent | ABS | | | -| | 3060_end_cap_enclosure_panel_clip | 4 | accent | ABS | | | -| | enclosure_handle | 3 | primary | ABS | | | -| | working_enclosure_frame_mount_front | 1 | primary | ABS | | | -| | working_enclosure_rear_mount_left | 1 | primary | ABS | | | -| | working_enclosure_rear_mount_right | 1 | primary | ABS | | | -| Frame Enclosure | frame_enclosure_corner_cap_foot | 2 | accent | ABS | | | -| | frame_enclosure_corner_cap_plain | 2 | accent | ABS | | | -| | panel_frame_hook_A | 1 | accent | ABS | | | -| | panel_frame_hook_B | 1 | accent | ABS | | | -| | panel_latch_arm_A | 1 | accent | ABS | | | -| | panel_latch_arm_B | 1 | accent | ABS | | | -| | panel_latch_corner_mount_A | 1 | accent | ABS | | | -| | panel_latch_corner_mount_B | 1 | accent | ABS | | | -| | cable_protection_fitting | 1 | primary | ABS | | | -| | cable_protection_nut | 1 | primary | ABS | | | -| | display_mount_landscape_front | 1 | primary | ABS | If using display in landscape orientation | | -| | display_mount_landscape_rear | 1 | primary | ABS | If using display in landscape orientation | | -| | display_mount_portrait_front | 1 | primary | ABS | If using display in portrait orientation | | -| | display_mount_portrait_rear | 1 | primary | ABS | If using display in portrait orientation | | -| Trim | 3060_end_cap_logo | 1 | accent | ABS | | | -| | accordion_cover_mount_A | 2 | primary | ABS | | | -| | accordion_cover_mount_B | 2 | primary | ABS | | | -| | debris_shield_back_left | 1 | primary | ABS | | | -| | debris_shield_back_right | 1 | primary | ABS | | | -| | debris_shield_front_left | 1 | primary | ABS | | | -| | debris_shield_front_right | 1 | primary | ABS | | | -| | gantry_front_brace_cover | 2 | primary | ABS | | | -| | x_drive_debris_cover_left | 1 | primary | ABS | | | -| | x_drive_debris_cover_right | 1 | primary | ABS | | | +### Tools and Guides - Frame Drilling + +| Name | Count | Color | Material | Notes | | +| --- | --- | --- | --- | --- | --- | +| drill_jig_frame_base_corners | 1 | N/A | PLA | Only needed if self drilling frame | [pp-p] for printed part, primary color | +| drill_jig_frame_base_gantry | 1 | N/A | PLA | Only needed if self drilling frame | [pp-s] for printed part, secondary color | +| drill_jig_frame_base_rails | 1 | N/A | PLA | Only needed if self drilling frame | [pp-c] for printed part, clear PETG | +| drill_jig_gantry_frame_left | 1 | N/A | PLA | Only needed if self drilling frame | [mp-a] for a machined part, aluminum | +| drill_jig_gantry_frame_right | 1 | N/A | PLA | Only needed if self drilling frame | [sp-o] for an opaque panel, structural / safety | +| | | | | | [sp-c] for a clear panel, structural / safety | + + +### Tools and Guides - Panel Drilling + +| Name | Count | Color | Material | Notes | | +| --- | --- | --- | --- | --- | --- | +| drill_template_60mm_fan | 1 | N/A | PLA | Only needed if self cutting panels | [ep-o] for an opaque panel used for an enclosure, non-structural | +| drill_template_60mm_fan_with_keystones | 1 | N/A | PLA | Only needed if self cutting panels | [ep-c] for a clear panel used for an enclosure, non-structural | +| drill_template_display_mount | 1 | N/A | PLA | Only needed if self cutting panels | | +| drill_template_power_inlet | 1 | N/A | PLA | Only needed if self cutting panels | | + + +### Tools and Guides - Assembly & Alignment + +| Name | Count | Color | Material | +| --- | --- | --- | --- | +| 1204_screw_clamp_A | 1 | N/A | PLA | +| 1204_screw_clamp_B | 1 | N/A | PLA | +| alignment_guide_2020_mgn15 | 2 | N/A | PLA | +| alignment_guide_3030_mgn15 | 2 | N/A | PLA | +| alignment_guide_3060_mgn15 | 2 | N/A | PLA | +| alignment_tool_x_axis | 1 | N/A | PLA | +| alignment_tool_y_axis | 1 | N/A | PLA | +| alignment_tool_y_drive | 1 | N/A | PLA | +| ballscrew_1204_maint_tool | 1 | N/A | PLA | +| setup_tool_z | 1 | N/A | PLA | +| tramming_bar | 1 | N/A | PLA | + + +### Core Frame and Drive + +| Name | Count | Color | Material | Notes | +| --- | --- | --- | --- | --- | +| x_endstop_mount_long_body | 1 | accent | ABS | Choose 1 of 4 (no 3d probe, long sensor) | +| x_endstop_mount_short_body | 1 | accent | ABS | Choose 1 of 4 (no 3d probe, short sensor) | +| x_endstop_probe_mount_long_body | 1 | accent | ABS | Choose 1 of 4 (3d probe, long sensor) | +| x_endstop_probe_mount_short_body | 1 | accent | ABS | Choose 1 of 4 (3d probe, short sensor) | +| x_endstop_trigger_mount | 1 | accent | ABS | | +| z_carriage_cover_air_mount | 1 | accent | ABS | Choose 1 of 2 | +| z_carriage_cover_blank | 1 | accent | ABS | Choose 1 of 2 | +| z_drive_belt_guard | 1 | accent | ABS | | +| z_drive_mount | 1 | accent | ABS | | +| z_drive_mount_cover | 1 | accent | ABS | | +| z_endstop_clamp | 1 | accent | ABS | | +| 3030_m6_nut_carrier | 1 | primary | ABS | | +| frame_cable_routing_cover | 1 | primary | ABS | | +| frame_endstop_cable_guide | 1 | primary | ABS | | +| gantry_chain_mount | 1 | primary | ABS | | +| rail_stop_20mm | 2 | primary | ABS | | +| sexbolt_debris_shield_extrusion | 1 | primary | ABS | Choose 1 of 2 | +| sexbolt_debris_shield_grid | 1 | primary | ABS | Choose 1 of 2 | +| tool_setter_cable_guide_OPTIONAL | 1 | primary | ABS | Only if using above table tool setter | +| tool_setter_under_mount_extrusion | 1 | primary | ABS | Choose 1 of 2, only for under table tool setter | +| tool_setter_under_mount_grid | 1 | primary | ABS | Choose 1 of 2, only for under table tool setter | +| x_ballscrew_block_mount | 1 | primary | ABS | | +| x_motor_mount | 1 | primary | ABS | | +| x_spacer_washer_guide | 1 | primary | ABS | | +| y_endstop_mount_long_body | 1 | primary | ABS | Choose 1 of 2 | +| y_endstop_mount_short_body | 1 | primary | ABS | Choose 1 of 2 | +| y_motor_mount | 1 | primary | ABS | | +| y_motor_tension_block | 1 | primary | ABS | | + + +### Electrical + +| Name | Count | Color | Material | Notes | +| --- | --- | --- | --- | --- | +| air_inlet_cover_hex | 1 | accent | ABS | | +| air_inlet_cover_mount_ring | 1 | accent | ABS | | +| fan_cover_keystone_hex | 1 | accent | ABS | | +| fan_cover_mount_plate | 1 | accent | ABS | | +| keystone_blank | 2 | accent | ABS | | +| daylight_cover | 1 | clear | PETG | | +| DIN Clips | 1 | primary | ABS | | +| IRM-30-XXST_din_mount | 2 | primary | ABS | | +| WAGO_221-415_3x5_2020mount | 1 | primary | ABS | | +| WAGO_221-415_2x5-2020mount | 2 | primary | ABS | | +| cable_mount_20mm | 8 | primary | ABS | | +| flexihal_DIN_mount_pair | 1 | primary | ABS | Only if using FlexiHAL controller | +| scylla_DIN_mount_pair | 1 | primary | ABS | Only if using Scylla controller | +| lrs_350_saddle_mount | 2 | primary | ABS | Only if using LRS 350 48V power supply | +| se_600_mount_A | 1 | primary | ABS | Only if using SE600 48V power supply | +| se_600_mount_B | 1 | primary | ABS | Only if using SE600 48V power supply | +| pi_mount_2020 | 1 | primary | ABS | | +| power_inlet_panel_mount_ring | 1 | primary | ABS | | +| power_inlet_panel_powercon | 1 | primary | ABS | | + + +### Workspace Enclosure + +| Name | Count | Color | Material | +| --- | --- | --- | --- | +| 3030_enclosure_panel_clip | 6 | accent | ABS | +| 3060_end_cap_enclosure_panel_clip | 4 | accent | ABS | +| enclosure_handle | 3 | primary | ABS | +| working_enclosure_frame_mount_front | 1 | primary | ABS | +| working_enclosure_rear_mount_left | 1 | primary | ABS | +| working_enclosure_rear_mount_right | 1 | primary | ABS | + + +### Frame Enclosure + +| Name | Count | Color | Material | Notes | +| --- | --- | --- | --- | --- | +| frame_enclosure_corner_cap_foot | 2 | accent | ABS | | +| frame_enclosure_corner_cap_plain | 2 | accent | ABS | | +| panel_frame_hook_A | 1 | accent | ABS | | +| panel_frame_hook_B | 1 | accent | ABS | | +| panel_latch_arm_A | 1 | accent | ABS | | +| panel_latch_arm_B | 1 | accent | ABS | | +| panel_latch_corner_mount_A | 1 | accent | ABS | | +| panel_latch_corner_mount_B | 1 | accent | ABS | | +| cable_protection_fitting | 1 | primary | ABS | | +| cable_protection_nut | 1 | primary | ABS | | +| display_mount_landscape_front | 1 | primary | ABS | If using display in landscape orientation | +| display_mount_landscape_rear | 1 | primary | ABS | If using display in landscape orientation | +| display_mount_portrait_front | 1 | primary | ABS | If using display in portrait orientation | +| display_mount_portrait_rear | 1 | primary | ABS | If using display in portrait orientation | + + +### Trim + +| Name | Count | Color | Material | +| --- | --- | --- | --- | +| 3060_end_cap_logo | 1 | accent | ABS | +| accordion_cover_mount_A | 2 | primary | ABS | +| accordion_cover_mount_B | 2 | primary | ABS | +| debris_shield_back_left | 1 | primary | ABS | +| debris_shield_back_right | 1 | primary | ABS | +| debris_shield_front_left | 1 | primary | ABS | +| debris_shield_front_right | 1 | primary | ABS | +| gantry_front_brace_cover | 2 | primary | ABS | +| x_drive_debris_cover_left | 1 | primary | ABS | +| x_drive_debris_cover_right | 1 | primary | ABS | ## Machined Parts -| Category | Name | Count | Color | Material | Notes | -| --- | --- | --- | --- | --- | --- | -| Core Frame and Drive | x_carriage_plate | 1 | N/A | aluminum | | -| | x_nut_block_spacer | 1 | N/A | aluminum | | -| | y_ballscrew_mount_front | 1 | N/A | aluminum | | -| | y_ballscrew_mount_rear | 1 | N/A | aluminum | | -| | y_carriage_block | 2 | N/A | aluminum | | -| | y_nut_block_spacer | 1 | N/A | aluminum | | -| | z_carriage_plate_M6_70x20 | 1 | N/A | aluminum | choose one based on spindle mount | -| | z_carriage_plate_M8_99x25 | 1 | N/A | aluminum | choose one based on spindle mount | -| | z_carriage_plate_M8_80x30 | 1 | N/A | aluminum | choose one based on spindle mount | -| | z_carriage_plate_blank | 1 | N/A | aluminum | choose one based on spindle mount | +### Core Frame and Drive + +| Name | Count | Color | Material | Notes | +| --- | --- | --- | --- | --- | +| x_carriage_plate | 1 | N/A | aluminum | | +| x_nut_block_spacer | 1 | N/A | aluminum | | +| y_ballscrew_mount_front | 1 | N/A | aluminum | | +| y_ballscrew_mount_rear | 1 | N/A | aluminum | | +| y_carriage_block | 2 | N/A | aluminum | | +| y_nut_block_spacer | 1 | N/A | aluminum | | +| z_carriage_plate_M6_70x20 | 1 | N/A | aluminum | choose one based on spindle mount | +| z_carriage_plate_M8_99x25 | 1 | N/A | aluminum | choose one based on spindle mount | +| z_carriage_plate_M8_80x30 | 1 | N/A | aluminum | choose one based on spindle mount | +| z_carriage_plate_blank | 1 | N/A | aluminum | choose one based on spindle mount | ## Panels - Laser or by hand -| Category | Name | Count | Color | Material | Notes | -| --- | --- | --- | --- | --- | --- | -| Core Frame and Drive | frame_bottom_panel | 1 | | steel / aluminum | 3mm | -| | gantry_back_panel | 1 | | steel / aluminum | 3mm | -| | gantry_front_brace | 2 | | steel / aluminum | 3mm | -| | gantry_side_brace_panel_left | 1 | | steel / aluminum | 3mm | -| | gantry_side_brace_panel_right | 1 | | steel / aluminum | 3mm | -| Workspace Enclosure | working_enclosure_panel_back_top | 1 | | polycarbonate | 5mm | -| | working_enclosure_panel_front_side | 1 | | polycarbonate | 5mm | -| | working_enclosure_panel_front_top | 1 | | polycarbonate | 5mm | -| | working_enclosure_panel_middle | 2 | | polycarbonate | 5mm | -| Frame Enclosure | frame_enclosure_panel_side | 1 | | acrylic or PC | 3mm, smoked or clear | -| (Must pick frame or printed) | frame_enclosure_panel_back | 1 | | ABS or PC | 3mm | -| | frame_enclosure_panel_bottom | 1 | | ABS or PC | 3mm | -| | frame_enclosure_panel_front | 1 | | ABS or PC | 3mm | -| | frame_enclosure_panel_top | 1 | | ABS or PC | 3mm | +### Core Frame and Drive + +| Name | Count | Color | Material | Notes | +| --- | --- | --- | --- | --- | +| frame_bottom_panel | 1 | | steel / aluminum | 3mm | +| gantry_back_panel | 1 | | steel / aluminum | 3mm | +| gantry_front_brace | 2 | | steel / aluminum | 3mm | +| gantry_side_brace_panel_left | 1 | | steel / aluminum | 3mm | +| gantry_side_brace_panel_right | 1 | | steel / aluminum | 3mm | + + +### Workspace Enclosure + +| Name | Count | Color | Material | Notes | +| --- | --- | --- | --- | --- | +| working_enclosure_panel_back_top | 1 | | polycarbonate | 5mm | +| working_enclosure_panel_front_side | 1 | | polycarbonate | 5mm | +| working_enclosure_panel_front_top | 1 | | polycarbonate | 5mm | +| working_enclosure_panel_middle | 2 | | polycarbonate | 5mm | + + +### Frame Enclosure + +| Name | Count | Color | Material | Notes | +| --- | --- | --- | --- | --- | +| frame_enclosure_panel_side | 1 | | acrylic or PC | 3mm, smoked or clear | + + +### (Must pick frame or printed) + +| Name | Count | Color | Material | Notes | +| --- | --- | --- | --- | --- | +| frame_enclosure_panel_back | 1 | | ABS or PC | 3mm | +| frame_enclosure_panel_bottom | 1 | | ABS or PC | 3mm | +| frame_enclosure_panel_front | 1 | | ABS or PC | 3mm | +| frame_enclosure_panel_top | 1 | | ABS or PC | 3mm | # Recommended Tools