diff --git a/Voron_Cascade_BOM.csv b/Voron_Cascade_BOM.csv new file mode 100644 index 0000000..dfa5e3f --- /dev/null +++ b/Voron_Cascade_BOM.csv @@ -0,0 +1,218 @@ +Section / Item,Part Number,Quantity +Required Tools,, +600mm (24”) straight edge or level (ruler if no other choice),,1 +300mm (12”) metal machinist scale,Both inch and metric scales,1 +"150mm (6”) calipers, preferably digital","200mm / 8"" as upgrade",1 +Dial indicator (metric or imperial) with mag base & arm,"25mm / 1"" travel",1 +"75mm (3”) machinist square, also 150mm (6”) if available.",Set of 4,1 +123 blocks,with holes,2 +"Step drill up to 1"" / 25mm",,1 +,, +Main Frame,, +"3030, 440mm, both ends tapped",HFSB6-3030-440-TPW,2 +"3060, 410mm, both ends tapped",HFSB6-3060-410-TPW,2 +"3060, 295mm, both ends tapped, counterbores",HFSB6-3060-295-TPW-Z8-YA15-YB45-YC140-YD170,2 +"3060, 410mm, both ends tapped, counterbores",HFSB6-3060-410-TPW-Z8-YA120-YB290,2 +"3060, 500mm, both ends tapped, counterbores",HFSB6-3060-500-TPW-Z8-XA120-XB150-YA15-YB485,1 +"3060, 500mm, both ends tapped, counterbores",HFSB6-3060-500-TPW-Z8-XA350-XB380-YA15-YB485,1 +"2020, 235mm, both ends tapped, wrench access holes",HFSB5-2020-235-TPW-Z6-YA50-YB75-YC205-YD230,2 +,, +Working Enclosure Frame,, +"2020, 190mm, both ends tapped",HFSB5-2020-190-TPW,2 +"2020, 265mm, both ends tapped",HFSB5-2020-265-TPW,4 +"2020, 469mm, both ends tapped, wrench access holes",HFSB5-2020-469-TPW-LCP-RCP,2 +,, +Frame Electronics Enclosure,, +"2020, 380mm, both ends tapped",HFSB5-2020-380-TPW,2 +"2020, 380mm, both ends tapped, wrench access holes",HFSB5-2020-380-TPW-AH20-BH90-CH190-DH360,2 +"2020, 290mm, both ends tapped",HFSB5-2020-290-TPW,2 +"2020, 290mm, both ends tapped, wrench access hole",HFSB5-2020-290-TPW-AH20,2 +"2020, 160mm, both ends tapped, wrench access holes",HFSB5-2020-160-TPW-LCP-RCP,4 +,, +Linear Rails,, +"MGN15C LINEAR GUIDE RAIL, 200mm","MGN15, 200mm length, dual compact carriage",2 +"MGN15H LINEAR GUIDE RAIL, 400mm","MGN15, 400mm length, dual carriage",4 +,, +Motion Components,, +"SFU1204 ball screw, 250mm",Assembly including BK10 and DSG12H (BF10 not used),1 +"SFU1204 ball screw, 400mm","Complete assembly including BK10, BF10, and DSG12H",2 +Motor drive pulley,"HTD-3M 9mm width, 20 tooth, 5mm or 6.35mm bore (per motor)",3 +Ball screw drive pulley,"HTD-3M 9mm width, 20 tooth, 8mm bore",3 +"X,Y drive belts","HTD-3M 9mm width, closed loop, 189mm long",2 +Z drive belt,"HTD-3M 9mm width, closed loop, 288mm long",1 +"NEMA23 motor, up to 117mm length",LDO 57STH86-3004A,3 +,, +Machined Parts (see other tab),, +X Carriage Plate,[mp-a]_x_carriage_plate,1 +X Ballscrew Nut Spacer,[mp-a]_x_nut_block_spacer,1 +Y Ballscrew Front Mount,[mp-a]_y_ballscrew_mount_front,1 +Y Ballscrew Rear Mount,[mp-a]_y_ballscrew_mount_rear,1 +Y Carriage Spacer,[mp-a]_y_carriage_block,2 +Y Ballscrew Nut Spacer,[mp-a]_y_nut_block_spacer,1 +SELECT: Z Carriage Plate (50mm spindle mount),[mp-a]_z_carriage_plate_M6_70x20,1 +SELECT: Z Carriage Plate (65mm spindle mount),[mp-a]_z_carriage_plate_M8_99x25,1 +SELECT: Z Carriage Plate (80mm spindle mount),[mp-a]_z_carriage_plate_M8_80x30,1 +"SELECT: Z Carriage Plate (blank, to be customized)",[mp-a]_z_carriage_plate_blank,1 +,, +Panels (see other tab),, +Opaque Frame Panels,"Aluminum or Steel 3mm (1/8"")", +,[sp-o]_frame_bottom_panel] (470x500),1 +,[sp-o]_gantry_back_panel (468x294),1 +,[sp-o]_gantry_front_brace (168x180),2 +,[sp-o]_gantry_side_brace_panel_left (354x135),1 +,[sp-o]_gantry_side_brace_panel_right (354x500),1 +Clear Working Enclosure Panels,"Polycarbonate 4.5mm or 5mm (3/16"")", +,[sp-c]_working_enclosure_panel_back_top (468x35),1 +,[sp-c]_working_enclosure_panel_front_side (348x305),1 +,[sp-c]_working_enclosure_panel_front_top (468x210),1 +,[sp-c]_working_enclosure_panel_middle (468x305),2 +Opaque Electronics Enclosure Panels,"ABS / PC / nylon 3mm (1/8"")", +,[ep-o]_frame_enclosure_panel_back (329x159),1 +,[ep-o]_frame_enclosure_panel_bottom (419x159),1 +,[ep-o]_frame_enclosure_panel_front (329x159),1 +,[ep-o]_frame_enclosure_panel_top (419x159),1 +Smoked Electronics Enclosure Panels,"Smoked Acrylic 3mm (1/8"")", +,[ep-c]_frame_enclosure_panel_side (380x302),1 +,, +Work Table Options,, +Option 1: T-Slot table,, +T-Slot single sided extrusions,HFSQN4-15100-300 - cheaper option,2 +,, +Option 2: Machined table,, +SMW 340x230 Grid Plate,Recommended upgrade - special order,1 +,, +Spindle Options,, +Option 1: AC VFD (strongly preferred),, +G-Penny 1.5kw 24k RPM ER16 spindle with H100 VFD,Package,1 +65mm Spindle clamp with 80x30 bolt pattern,G-Penny provided clamp does not fit,1 +Meanwell LRS-350-48,Stepper motor power supply,1 +"18 AWG (0.75mm^2), 3 core, braided shield, high flex VFD cable",Spindle cable is not provided,2 +,, +Option 2: DC brushless (discouraged but possible),, +500W Brushless ER16 (or ER11) Spindle,Commonly bought as package,1 +Meanwell SE-600-48," (dual purpose, spindle + stepper motors)",1 +Spindle Clamp,,1 +WS55-220,,1 +,, +Electronics,, +"60mm Axial Fan, 24V",,1 +"DIN Rail, 350mm",,1 +"DIN Rail, 100mm",,1 +Drag Chain 15x15,2-bolt end connectors,1 +E-Stop Button,"22mm through-hole, 1NO1NC",1 +PowerCON panel connector,Neutrik NAC3MPXXA,1 +PowerCON power cable,"One end Neutrik NAC3FXXA, other end local mains connector",1 +"24V, 30W power supply",Meanwell IRM-30-24ST,1 +"5V, 30W power supply",Meanwell IRM-30-5ST,1 +Inductive end stop,PL-08N or equivalent,3 +"TA35 rocker circuit breaker, 15A",Schurter TA35-CBDWF150C0,1 +"Mini contactor, DIN mounted, 120V or 240V coil voltage","Weg CWC025-00-30V18 (120V), CWC016-01-30V24 (230V)",1 +Sexbolt endstop PCB with included KW10,Part of sexbolt endstop kit,1 +Daylight on a matchstick,,1 +"Flat button, M12 or M16 diameter, with nut","Preferably one each in red, green, and yellow (or white)",3 +KW10 microswitch,Used for door safety switch,2 +Wago 5-conductor,220-415,7 +3D probe - OPTIONAL,Must be normal open,1 +Above table tool setter - OPTIONAL,,1 +Wire,"20awg PTFE, 2m",1 +,"24awg PTFE, 4m",1 +,"14awg PVC, 1m",1 +,, +Controller Configuration,, +Option 1: Expatria FlexiHAL + external drivers,, +Expatria FlexiHAL control board,,1 +DM542T stepper motor controller,,3 +,, +Option 2: BTT Scylla ,, +BTT Scylla CNC control board,Motor drivers are included,1 +,, +Local Management Computer,, +Raspberry Pi 4+ or better,,1 +"10.1"" touchscreen with VESA 75 mount","1280x800 minimum, HD (1920x1080) preferred",1 +USB-A to USB-C cable,,1 +USB-C to bare wire power cable,Supplemental power for display,1 +"Micro-HDMI to HDMI cable, 0.5m-1m long",Pi to touchscreen with no adapters,1 +180 angle USB-C adapter,,2 +180 angle HDMI adapter,,1 +USB-C keystone,,1 +"USB-C cable, 0.5m",internal cable for keystone,1 +Wireless mini-keyboard - OPTIONAL,Logitech K400 or similar,1 +,, +Hardware,, +"Rubber feet, 20mm diameter",GOM-04,6 +"M3 Threaded Insert, Voron spec",,38 +M3 2020 T-Nut,,2 +M3 3030 T-Nut,,60 +M5 2020 T-Nut,,115 +M5 3030 T-Nut,,43 +M6 3030 T-Nut,,82 +M3 Washer,,2 +M4 Washer,,12 +M5 Washer,,19 +M6 Washer,,5 +M8 Washer,,4 +M3 Hex Nut,,3 +M4 Hex Nut,,10 +M5 Hex Nut,,21 +M6 Hex Nut,,8 +M8 Hex Nut,,1 +M5x20 sexbolt / chicago bolt,Part of sexbolt endstop kit,1 +M2x10 Self-tapping Screw,,14 +M3x8 FHCS,,7 +M3x10 FHCS,,2 +M3x10 BHCS,,8 +M4x6 BHCS,,8 +M4x14 BHCS,,18 +M5x8 BHCS,,39 +M5x10 BHCS,,79 +M5x12 BHCS,,13 +M5x16 BHCS,,34 +M5x40 BHCS,,1 +M6x10 BHCS,,85 +M6x16 BHCS,,8 +M8x10 BHCS,,5 +M8x16 BHCS,,4 +M3x8 SHCS,,9 +M3x10 SHCS,,54 +M3x12 SHCS,,65 +M3x20 SHCS,,13 +M3x25 SHCS,,6 +M3x50 SHCS,,1 +M4x6 SHCS,Part of sexbolt endstop kit,1 +M4x16 SHCS,,8 +M5x10 SHCS,,9 +M5x12 SHCS,,22 +M5x16 SHCS,,9 +M5x20 SHCS,,18 +M5x25 SHCS,,6 +M5x30 SHCS,,10 +M5x60 SHCS,,2 +M6x35 SHCS,,11 +M6x40 SHCS,,6 +M6x65 SHCS,"Optional, For 50mm spindle mount",4 +M8x40 SHCS,,20 +M8x70 SHCS,,8 +M8x90 SHCS,"Optional, For 80mm spindle mount",4 +M6x100 threaded rod,,1 +"Precision shim tape, 0.1mm (0.004”) thick, <10mm wide",,1 +Accordion cover 15mmx300mm,Fabric (rubber infused) is preferred over plastic for flexibility.,2 +Loctite 242 or equivalent,,1 +"2mm x 100mm (4"") zip ties",,50 +"2020 extrusion slot cover, 1m section",,3 +"3030 extrusion slot cover, 1m section",,12 +MGN12 rail plugs,Used for X and Z rails only,50 +,, +Tools for drilling extrusion bed,Only needed if buying raw extrusion bed parts, +"1/8"" / 3mm drill bit",,1 +3/16 / 5mm drill bit,,1 +,, +Tools for drilling and preparing extrusions and panels,Only needed if buying raw extrusions and panels, +"9/64"" / 3.5mm drill bit",,1 +"7/32"" / 5.5mm drill bit",,1 +"21/64"" / 8.5mm drill bit",,1 +M8 counterbore tool,,1 +"9/16"" endmill with 1/2"" shank",Only if M8 counterbore is unavailable, +M3 tap,,1 +M5 tap,,1 +M8 tap,,1 +Tap handle (if not already owned),,1 diff --git a/Voron_Cascade_BOM.ods b/Voron_Cascade_BOM.ods new file mode 100644 index 0000000..838c0c6 Binary files /dev/null and b/Voron_Cascade_BOM.ods differ diff --git a/Voron_Cascade_BOM.xlsx b/Voron_Cascade_BOM.xlsx new file mode 100644 index 0000000..0a1c21f Binary files /dev/null and b/Voron_Cascade_BOM.xlsx differ