# Table of Contents

- [BOM](#bom)
- [Printed  & Machined Parts](#printed--&-machined-parts)
- [Recommended Tools](#recommended-tools)

# BOM

## Required Tools

| Section / Item | Part Number | Quantity |
| --- | --- | --- |
| 600mm (24”) straight edge or level (ruler if no other choice) |  | 1 |
| 300mm (12”) metal machinist scale | Both inch and metric scales | 1 |
| 150mm (6”) calipers, preferably digital | 200mm / 8" as upgrade | 1 |
| Dial indicator (metric or imperial) with mag base & arm | 25mm / 1" travel | 1 |
| 75mm (3”) machinist square, also 150mm (6”) if available. | Set of 4 | 1 |
| 123 blocks | with holes | 2 |
| Step drill up to 1" / 25mm |  | 1 |


## Main Frame

| Section / Item | Part Number | Quantity |
| --- | --- | --- |
| 3030, 440mm, both ends tapped | HFSB6-3030-440-TPW | 2 |
| 3060, 410mm, both ends tapped | HFSB6-3060-410-TPW | 2 |
| 3060, 295mm, both ends tapped, counterbores | HFSB6-3060-295-TPW-Z8-YA15-YB45-YC140-YD170 | 2 |
| 3060, 410mm, both ends tapped, counterbores | HFSB6-3060-410-TPW-Z8-YA120-YB290 | 2 |
| 3060, 500mm, both ends tapped, counterbores | HFSB6-3060-500-TPW-Z8-XA120-XB150-YA15-YB485 | 1 |
| 3060, 500mm, both ends tapped, counterbores | HFSB6-3060-500-TPW-Z8-XA350-XB380-YA15-YB485 | 1 |
| 2020, 235mm, both ends tapped, wrench access holes | HFSB5-2020-235-TPW-Z6-YA50-YB75-YC205-YD230 | 2 |


## Working Enclosure Frame

| Section / Item | Part Number | Quantity |
| --- | --- | --- |
| 2020, 190mm, both ends tapped | HFSB5-2020-190-TPW | 2 |
| 2020, 265mm, both ends tapped | HFSB5-2020-265-TPW | 4 |
| 2020, 469mm, both ends tapped, wrench access holes | HFSB5-2020-469-TPW-LCP-RCP | 2 |


## Frame Electronics Enclosure

| Section / Item | Part Number | Quantity |
| --- | --- | --- |
| 2020, 380mm, both ends tapped | HFSB5-2020-380-TPW | 2 |
| 2020, 380mm, both ends tapped, wrench access holes | HFSB5-2020-380-TPW-AH20-BH90-CH190-DH360 | 2 |
| 2020, 290mm, both ends tapped | HFSB5-2020-290-TPW | 2 |
| 2020, 290mm, both ends tapped, wrench access hole | HFSB5-2020-290-TPW-AH20 | 2 |
| 2020, 160mm, both ends tapped, wrench access holes | HFSB5-2020-160-TPW-LCP-RCP | 4 |


## Linear Rails

| Section / Item | Part Number | Quantity |
| --- | --- | --- |
| MGN15C LINEAR GUIDE RAIL, 200mm | MGN15, 200mm length, dual compact carriage | 2 |
| MGN15H LINEAR GUIDE RAIL, 400mm | MGN15, 400mm length, dual carriage | 4 |


## Motion Components

| Section / Item | Part Number | Quantity |
| --- | --- | --- |
| SFU1204 ball screw, 250mm | Assembly including BK10 and DSG12H (BF10 not used) | 1 |
| SFU1204 ball screw, 400mm | Complete assembly including BK10, BF10, and DSG12H | 2 |
| Motor drive pulley | HTD-3M 9mm width, 20 tooth, 5mm or 6.35mm bore (per motor) | 3 |
| Ball screw drive pulley | HTD-3M 9mm width, 20 tooth, 8mm bore | 3 |
| X,Y drive belts | HTD-3M 9mm width, closed loop, 189mm long | 2 |
| Z drive belt | HTD-3M 9mm width, closed loop, 288mm long | 1 |
| NEMA23 motor, up to 117mm length | LDO 57STH86-3004A | 3 |


## Machined Parts (see other tab)

| Section / Item | Part Number | Quantity |
| --- | --- | --- |
| X Carriage Plate | x_carriage_plate | 1 |
| X Ballscrew Nut Spacer | x_nut_block_spacer | 1 |
| Y Ballscrew Front Mount | y_ballscrew_mount_front | 1 |
| Y Ballscrew Rear Mount | y_ballscrew_mount_rear | 1 |
| Y Carriage Spacer | y_carriage_block | 2 |
| Y Ballscrew Nut Spacer | y_nut_block_spacer | 1 |
| SELECT: Z Carriage Plate (50mm spindle mount) | z_carriage_plate_M6_70x20 | 1 |
| SELECT: Z Carriage Plate (65mm spindle mount) | z_carriage_plate_M8_99x25 | 1 |
| SELECT: Z Carriage Plate (80mm spindle mount) | z_carriage_plate_M8_80x30 | 1 |
| SELECT: Z Carriage Plate (blank, to be customized) | z_carriage_plate_blank | 1 |


## Panels (see other tab)

| Section / Item | Part Number | Quantity |
| --- | --- | --- |
| Opaque Frame Panels | Aluminum or Steel 3mm (1/8") |  |
|  | frame_bottom_panel] (470x500) | 1 |
|  | gantry_back_panel (468x294) | 1 |
|  | gantry_front_brace (168x180) | 2 |
|  | gantry_side_brace_panel_left (354x135) | 1 |
|  | gantry_side_brace_panel_right (354x500) | 1 |
| Clear Working Enclosure Panels | Polycarbonate 4.5mm or 5mm (3/16") |  |
|  | working_enclosure_panel_back_top (468x35) | 1 |
|  | working_enclosure_panel_front_side (348x305) | 1 |
|  | working_enclosure_panel_front_top (468x210) | 1 |
|  | working_enclosure_panel_middle (468x305) | 2 |
| Opaque Electronics Enclosure Panels | ABS / PC / nylon 3mm (1/8") |  |
|  | frame_enclosure_panel_back (329x159) | 1 |
|  | frame_enclosure_panel_bottom (419x159) | 1 |
|  | frame_enclosure_panel_front (329x159) | 1 |
|  | frame_enclosure_panel_top (419x159) | 1 |
| Smoked Electronics Enclosure Panels | Smoked Acrylic 3mm (1/8") |  |
|  | frame_enclosure_panel_side (380x302) | 1 |


## Work Table Options

## Option 1: T-Slot table

| Section / Item | Part Number | Quantity |
| --- | --- | --- |
| T-Slot single sided extrusions | HFSQN4-15100-300 - cheaper option | 2 |


## Option 2: Machined table

| Section / Item | Part Number | Quantity |
| --- | --- | --- |
| SMW 340x230 Grid Plate | Recommended upgrade - special order | 1 |


## Spindle Options

## Option 1: AC VFD (strongly preferred)

| Section / Item | Part Number | Quantity |
| --- | --- | --- |
| G-Penny 1.5kw 24k RPM ER16 spindle with H100 VFD | Package | 1 |
| 65mm Spindle clamp with 80x30 bolt pattern | G-Penny provided clamp does not fit | 1 |
| Meanwell LRS-350-48 | Stepper motor power supply | 1 |
| 18 AWG (0.75mm^2), 3 core, braided shield, high flex VFD cable | Spindle cable is not provided | 2 |


## Option 2: DC brushless (discouraged but possible)

| Section / Item | Part Number | Quantity |
| --- | --- | --- |
| 500W Brushless ER16 (or ER11) Spindle | Commonly bought as package | 1 |
| Meanwell SE-600-48 | <included in package> (dual purpose, spindle + stepper motors) | 1 |
| Spindle Clamp | <included in package> | 1 |
| WS55-220 | <included in package> | 1 |


## Electronics

| Section / Item | Part Number | Quantity |
| --- | --- | --- |
| 60mm Axial Fan, 24V |  | 1 |
| DIN Rail, 350mm |  | 1 |
| DIN Rail, 100mm |  | 1 |
| Drag Chain 15x15 | 2-bolt end connectors | 1 |
| E-Stop Button | 22mm through-hole, 1NO1NC | 1 |
| PowerCON panel connector | Neutrik NAC3MPXXA | 1 |
| PowerCON power cable | One end Neutrik NAC3FXXA, other end local mains connector | 1 |
| 24V, 30W power supply | Meanwell IRM-30-24ST | 1 |
| 5V, 30W power supply | Meanwell IRM-30-5ST | 1 |
| Inductive end stop | PL-08N or equivalent | 3 |
| TA35 rocker circuit breaker, 15A | Schurter TA35-CBDWF150C0 | 1 |
| Mini contactor, DIN mounted, 120V or 240V coil voltage | Weg CWC025-00-30V18 (120V), CWC016-01-30V24 (230V) | 1 |
| Sexbolt endstop PCB with included KW10 | Part of sexbolt endstop kit | 1 |
| Daylight on a matchstick |  | 1 |
| Flat button, M12 or M16 diameter, with nut | Preferably one each in red, green, and yellow (or white) | 3 |
| KW10 microswitch | Used for door safety switch | 2 |
| Wago 5-conductor | 220-415 | 7 |
| 3D probe - OPTIONAL | Must be normal open | 1 |
| Above table tool setter - OPTIONAL |  | 1 |
| Wire | 20awg PTFE, 2m | 1 |
|  | 24awg PTFE, 4m | 1 |
|  | 14awg PVC, 1m | 1 |


## Controller Configuration

## Option 1: Expatria FlexiHAL + external drivers

| Section / Item | Part Number | Quantity |
| --- | --- | --- |
| Expatria FlexiHAL control board |  | 1 |
| DM542T stepper motor controller |  | 3 |


## Option 2: BTT Scylla

| Section / Item | Part Number | Quantity |
| --- | --- | --- |
| BTT Scylla CNC control board | Motor drivers are included | 1 |


## Local Management Computer

| Section / Item | Part Number | Quantity |
| --- | --- | --- |
| Raspberry Pi 4+ or better |  | 1 |
| 10.1" touchscreen with VESA 75 mount | 1280x800 minimum, HD (1920x1080) preferred | 1 |
| USB-A to USB-C cable |  | 1 |
| USB-C to bare wire power cable | Supplemental power for display | 1 |
| Micro-HDMI to HDMI cable, 0.5m-1m long | Pi to touchscreen with no adapters | 1 |
| 180 angle USB-C adapter |  | 2 |
| 180 angle HDMI adapter |  | 1 |
| USB-C keystone |  | 1 |
| USB-C cable, 0.5m | internal cable for keystone | 1 |
| Wireless mini-keyboard - OPTIONAL | Logitech K400 or similar | 1 |


## Hardware

| Section / Item | Part Number | Quantity |
| --- | --- | --- |
| Rubber feet, 20mm diameter | GOM-04 | 6 |
| M3 Threaded Insert, Voron spec |  | 38 |
| M3 2020 T-Nut |  | 2 |
| M3 3030 T-Nut |  | 60 |
| M5 2020 T-Nut |  | 115 |
| M5 3030 T-Nut |  | 43 |
| M6 3030 T-Nut |  | 82 |
| M3 Washer |  | 2 |
| M4 Washer |  | 12 |
| M5 Washer |  | 19 |
| M6 Washer |  | 5 |
| M8 Washer |  | 4 |
| M3 Hex Nut |  | 3 |
| M4 Hex Nut |  | 10 |
| M5 Hex Nut |  | 21 |
| M6 Hex Nut |  | 8 |
| M8 Hex Nut |  | 1 |
| M5x20 sexbolt / chicago bolt | Part of sexbolt endstop kit | 1 |
| M2x10 Self-tapping Screw |  | 14 |
| M3x8 FHCS |  | 7 |
| M3x10 FHCS |  | 2 |
| M3x10 BHCS |  | 8 |
| M4x6 BHCS |  | 8 |
| M4x14 BHCS |  | 18 |
| M5x8 BHCS |  | 39 |
| M5x10 BHCS |  | 79 |
| M5x12 BHCS |  | 13 |
| M5x16 BHCS |  | 34 |
| M5x40 BHCS |  | 1 |
| M6x10 BHCS |  | 85 |
| M6x16 BHCS |  | 8 |
| M8x10 BHCS |  | 5 |
| M8x16 BHCS |  | 4 |
| M3x8 SHCS |  | 9 |
| M3x10 SHCS |  | 54 |
| M3x12 SHCS |  | 65 |
| M3x20 SHCS |  | 13 |
| M3x25 SHCS |  | 6 |
| M3x50 SHCS |  | 1 |
| M4x6 SHCS | Part of sexbolt endstop kit | 1 |
| M4x16 SHCS |  | 8 |
| M5x10 SHCS |  | 9 |
| M5x12 SHCS |  | 22 |
| M5x16 SHCS |  | 9 |
| M5x20 SHCS |  | 18 |
| M5x25 SHCS |  | 6 |
| M5x30 SHCS |  | 10 |
| M5x60 SHCS |  | 2 |
| M6x35 SHCS |  | 11 |
| M6x40 SHCS |  | 6 |
| M6x65 SHCS | Optional, For 50mm spindle mount | 4 |
| M8x40 SHCS |  | 20 |
| M8x70 SHCS |  | 8 |
| M8x90 SHCS | Optional, For 80mm spindle mount | 4 |
| M6x100 threaded rod |  | 1 |
| Precision shim tape, 0.1mm (0.004”) thick, <10mm wide |  | 1 |
| Accordion cover 15mmx300mm | Fabric (rubber infused) is preferred over plastic for flexibility. | 2 |
| Loctite 242 or equivalent |  | 1 |
| 2mm x 100mm (4") zip ties |  | 50 |
| 2020 extrusion slot cover, 1m section |  | 3 |
| 3030 extrusion slot cover, 1m section |  | 12 |
| MGN12 rail plugs | Used for X and Z rails only | 50 |
| Tools for drilling extrusion bed | Only needed if buying raw extrusion bed parts |  |
| 1/8" / 3mm drill bit |  | 1 |
| 3/16 / 5mm drill bit |  | 1 |
| Tools for drilling and preparing extrusions and panels | Only needed if buying raw extrusions and panels |  |
| 9/64" / 3.5mm drill bit |  | 1 |
| 7/32" / 5.5mm drill bit |  | 1 |
| 21/64" / 8.5mm drill bit |  | 1 |
| M8 counterbore tool |  | 1 |
| 9/16" endmill with 1/2" shank | Only if M8 counterbore is unavailable |  |
| M3 tap |  | 1 |
| M5 tap |  | 1 |
| M8 tap |  | 1 |
| Tap handle (if not already owned) |  | 1 |


# Printed  & Machined Parts

## Printed Parts

| Category | Name | Count | Color | Material | Notes |  |
| --- | --- | --- | --- | --- | --- | --- |
| Tools and Guides - Frame Drilling | drill_jig_frame_base_corners | 1 | N/A | PLA | Only needed if self drilling frame | [pp-p] for printed part, primary color |
|  | drill_jig_frame_base_gantry | 1 | N/A | PLA | Only needed if self drilling frame | [pp-s] for printed part, secondary color |
|  | drill_jig_frame_base_rails | 1 | N/A | PLA | Only needed if self drilling frame | [pp-c] for printed part, clear PETG |
|  | drill_jig_gantry_frame_left | 1 | N/A | PLA | Only needed if self drilling frame | [mp-a] for a machined part, aluminum |
|  | drill_jig_gantry_frame_right | 1 | N/A | PLA | Only needed if self drilling frame | [sp-o] for an opaque panel, structural / safety |
|  |  |  |  |  |  | [sp-c] for a clear panel, structural / safety |
| Tools and Guides - Panel Drilling | drill_template_60mm_fan | 1 | N/A | PLA | Only needed if self cutting panels | [ep-o] for an opaque panel used for an enclosure, non-structural |
|  | drill_template_60mm_fan_with_keystones | 1 | N/A | PLA | Only needed if self cutting panels | [ep-c] for a clear panel used for an enclosure, non-structural |
|  | drill_template_display_mount | 1 | N/A | PLA | Only needed if self cutting panels |  |
|  | drill_template_power_inlet | 1 | N/A | PLA | Only needed if self cutting panels |  |
| Tools and Guides - Assembly & Alignment | 1204_screw_clamp_A | 1 | N/A | PLA |  |  |
|  | 1204_screw_clamp_B | 1 | N/A | PLA |  |  |
|  | alignment_guide_2020_mgn15 | 2 | N/A | PLA |  |  |
|  | alignment_guide_3030_mgn15 | 2 | N/A | PLA |  |  |
|  | alignment_guide_3060_mgn15 | 2 | N/A | PLA |  |  |
|  | alignment_tool_x_axis | 1 | N/A | PLA |  |  |
|  | alignment_tool_y_axis | 1 | N/A | PLA |  |  |
|  | alignment_tool_y_drive | 1 | N/A | PLA |  |  |
|  | ballscrew_1204_maint_tool | 1 | N/A | PLA |  |  |
|  | setup_tool_z | 1 | N/A | PLA |  |  |
|  | tramming_bar | 1 | N/A | PLA |  |  |
| Core Frame and Drive | x_endstop_mount_long_body | 1 | accent | ABS | Choose 1 of 4 (no 3d probe, long sensor) |  |
|  | x_endstop_mount_short_body | 1 | accent | ABS | Choose 1 of 4 (no 3d probe, short sensor) |  |
|  | x_endstop_probe_mount_long_body | 1 | accent | ABS | Choose 1 of 4 (3d probe, long sensor) |  |
|  | x_endstop_probe_mount_short_body | 1 | accent | ABS | Choose 1 of 4 (3d probe, short sensor) |  |
|  | x_endstop_trigger_mount | 1 | accent | ABS |  |  |
|  | z_carriage_cover_air_mount | 1 | accent | ABS | Choose 1 of 2 |  |
|  | z_carriage_cover_blank | 1 | accent | ABS | Choose 1 of 2 |  |
|  | z_drive_belt_guard | 1 | accent | ABS |  |  |
|  | z_drive_mount | 1 | accent | ABS |  |  |
|  | z_drive_mount_cover | 1 | accent | ABS |  |  |
|  | z_endstop_clamp | 1 | accent | ABS |  |  |
|  | 3030_m6_nut_carrier | 1 | primary | ABS |  |  |
|  | frame_cable_routing_cover | 1 | primary | ABS |  |  |
|  | frame_endstop_cable_guide | 1 | primary | ABS |  |  |
|  | gantry_chain_mount | 1 | primary | ABS |  |  |
|  | rail_stop_20mm | 2 | primary | ABS |  |  |
|  | sexbolt_debris_shield_extrusion | 1 | primary | ABS | Choose 1 of 2 |  |
|  | sexbolt_debris_shield_grid | 1 | primary | ABS | Choose 1 of 2 |  |
|  | tool_setter_cable_guide_OPTIONAL | 1 | primary | ABS | Only if using above table tool setter |  |
|  | tool_setter_under_mount_extrusion | 1 | primary | ABS | Choose 1 of 2, only for under table tool setter |  |
|  | tool_setter_under_mount_grid | 1 | primary | ABS | Choose 1 of 2, only for under table tool setter |  |
|  | x_ballscrew_block_mount | 1 | primary | ABS |  |  |
|  | x_motor_mount | 1 | primary | ABS |  |  |
|  | x_spacer_washer_guide | 1 | primary | ABS |  |  |
|  | y_endstop_mount_long_body | 1 | primary | ABS | Choose 1 of 2 |  |
|  | y_endstop_mount_short_body | 1 | primary | ABS | Choose 1 of 2 |  |
|  | y_motor_mount | 1 | primary | ABS |  |  |
|  | y_motor_tension_block | 1 | primary | ABS |  |  |
| Electrical | air_inlet_cover_hex | 1 | accent | ABS |  |  |
|  | air_inlet_cover_mount_ring | 1 | accent | ABS |  |  |
|  | fan_cover_keystone_hex | 1 | accent | ABS |  |  |
|  | fan_cover_mount_plate | 1 | accent | ABS |  |  |
|  | keystone_blank | 2 | accent | ABS |  |  |
|  | daylight_cover | 1 | clear | PETG |  |  |
|  | DIN Clips | 1 | primary | ABS |  |  |
|  | IRM-30-XXST_din_mount | 2 | primary | ABS |  |  |
|  | WAGO_221-415_3x5_2020mount | 1 | primary | ABS |  |  |
|  | WAGO_221-415_2x5-2020mount | 2 | primary | ABS |  |  |
|  | cable_mount_20mm | 8 | primary | ABS |  |  |
|  | flexihal_DIN_mount_pair | 1 | primary | ABS | Only if using FlexiHAL controller |  |
|  | scylla_DIN_mount_pair | 1 | primary | ABS | Only if using Scylla controller |  |
|  | lrs_350_saddle_mount | 2 | primary | ABS | Only if using LRS 350 48V power supply |  |
|  | se_600_mount_A | 1 | primary | ABS | Only if using SE600 48V power supply |  |
|  | se_600_mount_B | 1 | primary | ABS | Only if using SE600 48V power supply |  |
|  | pi_mount_2020 | 1 | primary | ABS |  |  |
|  | power_inlet_panel_mount_ring | 1 | primary | ABS |  |  |
|  | power_inlet_panel_powercon | 1 | primary | ABS |  |  |
| Workspace Enclosure | 3030_enclosure_panel_clip | 6 | accent | ABS |  |  |
|  | 3060_end_cap_enclosure_panel_clip | 4 | accent | ABS |  |  |
|  | enclosure_handle | 3 | primary | ABS |  |  |
|  | working_enclosure_frame_mount_front | 1 | primary | ABS |  |  |
|  | working_enclosure_rear_mount_left | 1 | primary | ABS |  |  |
|  | working_enclosure_rear_mount_right | 1 | primary | ABS |  |  |
| Frame Enclosure | frame_enclosure_corner_cap_foot | 2 | accent | ABS |  |  |
|  | frame_enclosure_corner_cap_plain | 2 | accent | ABS |  |  |
|  | panel_frame_hook_A | 1 | accent | ABS |  |  |
|  | panel_frame_hook_B | 1 | accent | ABS |  |  |
|  | panel_latch_arm_A | 1 | accent | ABS |  |  |
|  | panel_latch_arm_B | 1 | accent | ABS |  |  |
|  | panel_latch_corner_mount_A | 1 | accent | ABS |  |  |
|  | panel_latch_corner_mount_B | 1 | accent | ABS |  |  |
|  | cable_protection_fitting | 1 | primary | ABS |  |  |
|  | cable_protection_nut | 1 | primary | ABS |  |  |
|  | display_mount_landscape_front | 1 | primary | ABS | If using display in landscape orientation |  |
|  | display_mount_landscape_rear | 1 | primary | ABS | If using display in landscape orientation |  |
|  | display_mount_portrait_front | 1 | primary | ABS | If using display in portrait orientation |  |
|  | display_mount_portrait_rear | 1 | primary | ABS | If using display in portrait orientation |  |
| Trim | 3060_end_cap_logo | 1 | accent | ABS |  |  |
|  | accordion_cover_mount_A | 2 | primary | ABS |  |  |
|  | accordion_cover_mount_B | 2 | primary | ABS |  |  |
|  | debris_shield_back_left | 1 | primary | ABS |  |  |
|  | debris_shield_back_right | 1 | primary | ABS |  |  |
|  | debris_shield_front_left | 1 | primary | ABS |  |  |
|  | debris_shield_front_right | 1 | primary | ABS |  |  |
|  | gantry_front_brace_cover | 2 | primary | ABS |  |  |
|  | x_drive_debris_cover_left | 1 | primary | ABS |  |  |
|  | x_drive_debris_cover_right | 1 | primary | ABS |  |  |


## Machined Parts

| Category | Name | Count | Color | Material | Notes |
| --- | --- | --- | --- | --- | --- |
| Core Frame and Drive | x_carriage_plate | 1 | N/A | aluminum |  |
|  | x_nut_block_spacer | 1 | N/A | aluminum |  |
|  | y_ballscrew_mount_front | 1 | N/A | aluminum |  |
|  | y_ballscrew_mount_rear | 1 | N/A | aluminum |  |
|  | y_carriage_block | 2 | N/A | aluminum |  |
|  | y_nut_block_spacer | 1 | N/A | aluminum |  |
|  | z_carriage_plate_M6_70x20 | 1 | N/A | aluminum | choose one based on spindle mount |
|  | z_carriage_plate_M8_99x25 | 1 | N/A | aluminum | choose one based on spindle mount |
|  | z_carriage_plate_M8_80x30 | 1 | N/A | aluminum | choose one based on spindle mount |
|  | z_carriage_plate_blank | 1 | N/A | aluminum | choose one based on spindle mount |


## Panels - Laser or by hand

| Category | Name | Count | Color | Material | Notes |
| --- | --- | --- | --- | --- | --- |
| Core Frame and Drive | frame_bottom_panel | 1 |  | steel / aluminum | 3mm |
|  | gantry_back_panel | 1 |  | steel / aluminum | 3mm |
|  | gantry_front_brace | 2 |  | steel / aluminum | 3mm |
|  | gantry_side_brace_panel_left | 1 |  | steel / aluminum | 3mm |
|  | gantry_side_brace_panel_right | 1 |  | steel / aluminum | 3mm |
| Workspace Enclosure | working_enclosure_panel_back_top | 1 |  | polycarbonate | 5mm |
|  | working_enclosure_panel_front_side | 1 |  | polycarbonate | 5mm |
|  | working_enclosure_panel_front_top | 1 |  | polycarbonate | 5mm |
|  | working_enclosure_panel_middle | 2 |  | polycarbonate | 5mm |
| Frame Enclosure | frame_enclosure_panel_side | 1 |  | acrylic or PC | 3mm, smoked or clear |
| (Must pick frame or printed) | frame_enclosure_panel_back | 1 |  | ABS or PC | 3mm |
|  | frame_enclosure_panel_bottom | 1 |  | ABS or PC | 3mm |
|  | frame_enclosure_panel_front | 1 |  | ABS or PC | 3mm |
|  | frame_enclosure_panel_top | 1 |  | ABS or PC | 3mm |


# Recommended Tools

## Recommended additionalmeasuring and cutting tools for those new to machining

| Column 1 | Column 2 | Column 3 | Column 4 |
| --- | --- | --- | --- |
| For things that measure and things that cut, you get what you pay for! |  |  |  |
| Measuring & Setup Tools | Notes | Quantity | Link |
| 25mm or 1" micrometer |  | 1 |  |
| Scribe with carbide tip |  | 1 |  |
| Feeler gauge set |  | 1 | https://www.aliexpress.com/item/1005005899956007.html |
| Edge finder, 1/4" or 3/8" shank |  | 1 |  |
| Tape measure |  | 1 |  |
| Combination wrench set | Both inch and metric | 1 |  |
| Hex key set | Both inch and metric | 1 |  |
| Deadblow hammer |  | 1 |  |
| Deburring tool set |  | 1 |  |
| File set |  | 1 |  |
| Machinist reference |  | 1 |  |


## Workholding and Cutting

| Column 1 | Column 2 | Column 3 |
| --- | --- | --- |
| Low profile vise |  | 1 |
| 1/8" flat bottom single flute endmills, carbide and HSS | expect to break them | 4 |
| 1/8" flat bottom 2-flute endmills, HSS |  | 2 |
| 1/8" ball end endmills |  | 2 |