voron-cascade/Voron_Cascade_BOM.csv

1	Section / Item	Part Number	Quantity
2	Required Tools
3	600mm (24”) straight edge or level (ruler if no other choice)		1
4	300mm (12”) metal machinist scale	Both inch and metric scales	1
5	150mm (6”) calipers, preferably digital	200mm / 8" as upgrade	1
6	Dial indicator (metric or imperial) with mag base & arm	25mm / 1" travel	1
7	75mm (3”) machinist square, also 150mm (6”) if available.	Set of 4	1
8	123 blocks	with holes	2
9	Step drill up to 1" / 25mm		1
10
11	Main Frame
12	3030, 440mm, both ends tapped	HFSB6-3030-440-TPW	2
13	3060, 410mm, both ends tapped	HFSB6-3060-410-TPW	2
14	3060, 295mm, both ends tapped, counterbores	HFSB6-3060-295-TPW-Z8-YA15-YB45-YC140-YD170	2
15	3060, 410mm, both ends tapped, counterbores	HFSB6-3060-410-TPW-Z8-YA120-YB290	2
16	3060, 500mm, both ends tapped, counterbores	HFSB6-3060-500-TPW-Z8-XA120-XB150-YA15-YB485	1
17	3060, 500mm, both ends tapped, counterbores	HFSB6-3060-500-TPW-Z8-XA350-XB380-YA15-YB485	1
18	2020, 235mm, both ends tapped, wrench access holes	HFSB5-2020-235-TPW-Z6-YA50-YB75-YC205-YD230	2
19
20	Working Enclosure Frame
21	2020, 190mm, both ends tapped	HFSB5-2020-190-TPW	2
22	2020, 265mm, both ends tapped	HFSB5-2020-265-TPW	4
23	2020, 469mm, both ends tapped, wrench access holes	HFSB5-2020-469-TPW-LCP-RCP	2
24
25	Frame Electronics Enclosure
26	2020, 380mm, both ends tapped	HFSB5-2020-380-TPW	2
27	2020, 380mm, both ends tapped, wrench access holes	HFSB5-2020-380-TPW-AH20-BH90-CH190-DH360	2
28	2020, 290mm, both ends tapped	HFSB5-2020-290-TPW	2
29	2020, 290mm, both ends tapped, wrench access hole	HFSB5-2020-290-TPW-AH20	2
30	2020, 160mm, both ends tapped, wrench access holes	HFSB5-2020-160-TPW-LCP-RCP	4
31
32	Linear Rails
33	MGN15C LINEAR GUIDE RAIL, 200mm	MGN15, 200mm length, dual compact carriage	2
34	MGN15H LINEAR GUIDE RAIL, 400mm	MGN15, 400mm length, dual carriage	4
35
36	Motion Components
37	SFU1204 ball screw, 250mm	Assembly including BK10 and DSG12H (BF10 not used)	1
38	SFU1204 ball screw, 400mm	Complete assembly including BK10, BF10, and DSG12H	2
39	Motor drive pulley	HTD-3M 9mm width, 20 tooth, 5mm or 6.35mm bore (per motor)	3
40	Ball screw drive pulley	HTD-3M 9mm width, 20 tooth, 8mm bore	3
41	X,Y drive belts	HTD-3M 9mm width, closed loop, 189mm long	2
42	Z drive belt	HTD-3M 9mm width, closed loop, 288mm long	1
43	NEMA23 motor, up to 117mm length	LDO 57STH86-3004A	3
44
45	Machined Parts (see other tab)
46	X Carriage Plate	[mp-a]_x_carriage_plate	1
47	X Ballscrew Nut Spacer	[mp-a]_x_nut_block_spacer	1
48	Y Ballscrew Front Mount	[mp-a]_y_ballscrew_mount_front	1
49	Y Ballscrew Rear Mount	[mp-a]_y_ballscrew_mount_rear	1
50	Y Carriage Spacer	[mp-a]_y_carriage_block	2
51	Y Ballscrew Nut Spacer	[mp-a]_y_nut_block_spacer	1
52	SELECT: Z Carriage Plate (50mm spindle mount)	[mp-a]_z_carriage_plate_M6_70x20	1
53	SELECT: Z Carriage Plate (65mm spindle mount)	[mp-a]_z_carriage_plate_M8_99x25	1
54	SELECT: Z Carriage Plate (80mm spindle mount)	[mp-a]_z_carriage_plate_M8_80x30	1
55	SELECT: Z Carriage Plate (blank, to be customized)	[mp-a]_z_carriage_plate_blank	1
56
57	Panels (see other tab)
58	Opaque Frame Panels	Aluminum or Steel 3mm (1/8")
59		[sp-o]_frame_bottom_panel] (470x500)	1
60		[sp-o]_gantry_back_panel (468x294)	1
61		[sp-o]_gantry_front_brace (168x180)	2
62		[sp-o]_gantry_side_brace_panel_left (354x135)	1
63		[sp-o]_gantry_side_brace_panel_right (354x500)	1
64	Clear Working Enclosure Panels	Polycarbonate 4.5mm or 5mm (3/16")
65		[sp-c]_working_enclosure_panel_back_top (468x35)	1
66		[sp-c]_working_enclosure_panel_front_side (348x305)	1
67		[sp-c]_working_enclosure_panel_front_top (468x210)	1
68		[sp-c]_working_enclosure_panel_middle (468x305)	2
69	Opaque Electronics Enclosure Panels	ABS / PC / nylon 3mm (1/8")
70		[ep-o]_frame_enclosure_panel_back (329x159)	1
71		[ep-o]_frame_enclosure_panel_bottom (419x159)	1
72		[ep-o]_frame_enclosure_panel_front (329x159)	1
73		[ep-o]_frame_enclosure_panel_top (419x159)	1
74	Smoked Electronics Enclosure Panels	Smoked Acrylic 3mm (1/8")
75		[ep-c]_frame_enclosure_panel_side (380x302)	1
76
77	Work Table Options
78	Option 1: T-Slot table
79	T-Slot single sided extrusions	HFSQN4-15100-300 - cheaper option	2
80
81	Option 2: Machined table
82	SMW 340x230 Grid Plate	Recommended upgrade - special order	1
83
84	Spindle Options
85	Option 1: AC VFD (strongly preferred)
86	G-Penny 1.5kw 24k RPM ER16 spindle with H100 VFD	Package	1
87	65mm Spindle clamp with 80x30 bolt pattern	G-Penny provided clamp does not fit	1
88	Meanwell LRS-350-48	Stepper motor power supply	1
89	18 AWG (0.75mm^2), 3 core, braided shield, high flex VFD cable	Spindle cable is not provided	2
90
91	Option 2: DC brushless (discouraged but possible)
92	500W Brushless ER16 (or ER11) Spindle	Commonly bought as package	1
93	Meanwell SE-600-48	<included in package> (dual purpose, spindle + stepper motors)	1
94	Spindle Clamp	<included in package>	1
95	WS55-220	<included in package>	1
96
97	Electronics
98	60mm Axial Fan, 24V		1
99	DIN Rail, 350mm		1
100	DIN Rail, 100mm		1
101	Drag Chain 15x15	2-bolt end connectors	1
102	E-Stop Button	22mm through-hole, 1NO1NC	1
103	PowerCON panel connector	Neutrik NAC3MPXXA	1
104	PowerCON power cable	One end Neutrik NAC3FXXA, other end local mains connector	1
105	24V, 30W power supply	Meanwell IRM-30-24ST	1
106	5V, 30W power supply	Meanwell IRM-30-5ST	1
107	Inductive end stop	PL-08N or equivalent	3
108	TA35 rocker circuit breaker, 15A	Schurter TA35-CBDWF150C0	1
109	Mini contactor, DIN mounted, 120V or 240V coil voltage	Weg CWC025-00-30V18 (120V), CWC016-01-30V24 (230V)	1
110	Sexbolt endstop PCB with included KW10	Part of sexbolt endstop kit	1
111	Daylight on a matchstick		1
112	Flat button, M12 or M16 diameter, with nut	Preferably one each in red, green, and yellow (or white)	3
113	KW10 microswitch	Used for door safety switch	2
114	Wago 5-conductor	220-415	7
115	3D probe - OPTIONAL	Must be normal open	1
116	Above table tool setter - OPTIONAL		1
117	Wire	20awg PTFE, 2m	1
118		24awg PTFE, 4m	1
119		14awg PVC, 1m	1
120
121	Controller Configuration
122	Option 1: Expatria FlexiHAL + external drivers
123	Expatria FlexiHAL control board		1
124	DM542T stepper motor controller		3
125
126	Option 2: BTT Scylla
127	BTT Scylla CNC control board	Motor drivers are included	1
128
129	Local Management Computer
130	Raspberry Pi 4+ or better		1
131	10.1" touchscreen with VESA 75 mount	1280x800 minimum, HD (1920x1080) preferred	1
132	USB-A to USB-C cable		1
133	USB-C to bare wire power cable	Supplemental power for display	1
134	Micro-HDMI to HDMI cable, 0.5m-1m long	Pi to touchscreen with no adapters	1
135	180 angle USB-C adapter		2
136	180 angle HDMI adapter		1
137	USB-C keystone		1
138	USB-C cable, 0.5m	internal cable for keystone	1
139	Wireless mini-keyboard - OPTIONAL	Logitech K400 or similar	1
140
141	Hardware
142	Rubber feet, 20mm diameter	GOM-04	6
143	M3 Threaded Insert, Voron spec		38
144	M3 2020 T-Nut		2
145	M3 3030 T-Nut		60
146	M5 2020 T-Nut		115
147	M5 3030 T-Nut		43
148	M6 3030 T-Nut		82
149	M3 Washer		2
150	M4 Washer		12
151	M5 Washer		19
152	M6 Washer		5
153	M8 Washer		4
154	M3 Hex Nut		3
155	M4 Hex Nut		10
156	M5 Hex Nut		21
157	M6 Hex Nut		8
158	M8 Hex Nut		1
159	M5x20 sexbolt / chicago bolt	Part of sexbolt endstop kit	1
160	M2x10 Self-tapping Screw		14
161	M3x8 FHCS		7
162	M3x10 FHCS		2
163	M3x10 BHCS		8
164	M4x6 BHCS		8
165	M4x14 BHCS		18
166	M5x8 BHCS		39
167	M5x10 BHCS		79
168	M5x12 BHCS		13
169	M5x16 BHCS		34
170	M5x40 BHCS		1
171	M6x10 BHCS		85
172	M6x16 BHCS		8
173	M8x10 BHCS		5
174	M8x16 BHCS		4
175	M3x8 SHCS		9
176	M3x10 SHCS		54
177	M3x12 SHCS		65
178	M3x20 SHCS		13
179	M3x25 SHCS		6
180	M3x50 SHCS		1
181	M4x6 SHCS	Part of sexbolt endstop kit	1
182	M4x16 SHCS		8
183	M5x10 SHCS		9
184	M5x12 SHCS		22
185	M5x16 SHCS		9
186	M5x20 SHCS		18
187	M5x25 SHCS		6
188	M5x30 SHCS		10
189	M5x60 SHCS		2
190	M6x35 SHCS		11
191	M6x40 SHCS		6
192	M6x65 SHCS	Optional, For 50mm spindle mount	4
193	M8x40 SHCS		20
194	M8x70 SHCS		8
195	M8x90 SHCS	Optional, For 80mm spindle mount	4
196	M6x100 threaded rod		1
197	Precision shim tape, 0.1mm (0.004”) thick, <10mm wide		1
198	Accordion cover 15mmx300mm	Fabric (rubber infused) is preferred over plastic for flexibility.	2
199	Loctite 242 or equivalent		1
200	2mm x 100mm (4") zip ties		50
201	2020 extrusion slot cover, 1m section		3
202	3030 extrusion slot cover, 1m section		12
203	MGN12 rail plugs	Used for X and Z rails only	50
204
205	Tools for drilling extrusion bed	Only needed if buying raw extrusion bed parts
206	1/8" / 3mm drill bit		1
207	3/16 / 5mm drill bit		1
208
209	Tools for drilling and preparing extrusions and panels	Only needed if buying raw extrusions and panels
210	9/64" / 3.5mm drill bit		1
211	7/32" / 5.5mm drill bit		1
212	21/64" / 8.5mm drill bit		1
213	M8 counterbore tool		1
214	9/16" endmill with 1/2" shank	Only if M8 counterbore is unavailable
215	M3 tap		1
216	M5 tap		1
217	M8 tap		1
218	Tap handle (if not already owned)		1