- Strip leading / from pattern before git check-ignore so root-anchored
patterns like /AGENTS.md are checked as repo-relative paths (AGENTS.md)
and correctly match existing rules — fixes duplicates on every run
- Rework helper to accept multiple patterns and write them as a single
labeled block with project-style header/footer comment rather than
appending bare patterns one at a time
- Move gitignore calls out of per-plug loop in --plugins mode so all
three docs/ patterns are checked and written in one block
- Remove 5 duplicate bare entries left in .gitignore by the broken runs
- Move plugin dir creation into --plugins mode (not 'Always') so --agents
alone no longer creates empty AGENTS/plugins/ dirs
- Wrappers (claude, agy) now call plain agents-init (both modes) so plugin
dirs in docs/ are migrated on the first AI launch, not just --agents
- Rewrite --agents CLAUDE.md logic: detect which root files are real vs
symlinks and handle all four cases (both/agents-only/claude-only/neither)
without ever losing content
- AGENTS/CLAUDE.md is now its own file in AGENTS/ (real file when both
existed, symlink → AGENTS.md for single-source cases)
- Root CLAUDE.md now points to AGENTS/CLAUDE.md instead of AGENTS/AGENTS.md;
readlink checks auto-fix existing symlinks with the wrong target
- New empty setups get AGENTS/AGENTS.md pre-populated with the agent
directive warning editors not to write through the root symlinks
Panel now selects from four width tiers based on $COLUMNS (with a 6-col
buffer per side before stepping up): 52-wide (default), 70, 74, or 78.
Each tier carries richer category descriptions sized to fit the layout.
The box is horizontally centered on every draw via a left-padding prefix.
Key reader switches from stty min 1 to min 0 / time 3, giving a 0.3 s
poll interval so COLUMNS changes are detected without a keypress. The
erase formula is now wrap-aware: prev_max_line_width / COLUMNS gives the
wrap factor, ensuring old wider panels are fully cleared after narrowing.
Idle timeout ticks that detect no resize are skipped entirely.
New functions/claude.fish wraps the claude CLI. Before launch it checks the
current directory and the git project root; when CLAUDE.md is absent but
AGENTS.md is present, it creates a relative symlink CLAUDE.md -> AGENTS.md so
Claude Code picks up shared agent instructions without duplicating the file.
Arguments are forwarded verbatim.
Implemented as a C1 command shadow: when __fish_config_op_aliases (or the
master __fish_config_opinionated) is disabled, the call passes through to the
bare claude binary unchanged. Link-creation notices print to stderr in green.
Documents the new shadow in docs/fish-config.md (section 5.12 AI tools, C1
component reference table, and C1 summary list) and adds a claude-cli anchor
to docs/fish-config.index.
When a category variable is set explicitly in both universal and session
scope, interactive fish prints a one-line stderr warning ("successfully set
universal 'X'; but a global by that name shadows it") on each `set -U`/`set
-g`. That stray line landed between the apply and the in-place panel redraw,
pushing the cursor down one row so the `\e[14A` cursor-up no longer reached
the top border — leaving it behind to stack on every toggle and persist
after exit.
Suppress stderr on the six set commands in __config_toggle_apply. The
warning is expected noise here since config-toggle edits both scopes
independently. The warning only fires in a real interactive TTY (not under
`fish -ic`), which is why it was easy to miss when testing.
Required tier is now fish, fzf, and zoxide only — the tools the config
meaningfully can't function without. Everything else degrades gracefully.
- cargo: only used by fish-deps to install Rust tools or build fish from
source; all paths are already gated on type -q cargo
- starship: type -q guard in conf.d/starship.fish; shell falls back to
fish's built-in prompt without it
- fisher: auto-bootstrapped by first_run.fish; no need for users or
fish-deps to manage it. Remove from catalog and clean up the now-dead
fisher-bootstrap/special-fisher installer cases.
Catalog arrays verified aligned at 26 entries each.
direnv integration is fully guarded with type -q direnv in config.fish.
The auto-venv script checks $DIRENV_DIR (set at runtime), not the binary.
Without direnv installed the hook simply never loads and venv activation
fires normally. No functionality breaks.
uv is only used in the fish-deps fish-from-source build path
(uv run --no-managed-python cargo install --path .) and is not required
by the config at runtime. All consumers degrade gracefully without it.
pipx appeared in the installer's method-building and execution switch
blocks but no catalog entry ever sets special=pipx, making both branches
permanently unreachable dead code. The docs listed pipx as install
priority #6 which was equally misleading.
- _fish_deps_catalog: change uv tier from req → rec
- _fish_deps_install: remove case pipx method-builder and
special-pipx / special-pip execution cases
- docs/fish-config.md: move uv from Required to Recommended catalog
entry with accurate description; drop pipx from install priority
list and tier summary
python3 is used unguarded by the AI session helpers and (guarded) by the
paru/yay log cleaner, but was absent from the dependency catalog and docs.
uv does not provide python3 on PATH, and Arch's base omits it, so it is
tracked separately rather than assumed via uv.
- Add python3 (recommended tier, pm: python) to _fish_deps_catalog.fish
- Guard python3 calls in save_claude_session/save_antigravity_session with
`type -q python3`, emitting valid empty JSON when absent (Convention §6)
- Document python3 in docs/fish-config.md (§5.6 tiers + catalog entry)
The badge now positions each state by where it sits on the scale: OFF
left-aligned, DEFAULT centered, ON right-aligned. This makes the
OFF ← DEFAULT → ON ordering visible at a glance and reinforces the
direction the ←→/h l keys move.
Directional arrows fully cover value changes, so the Space cycle is
removed. Add h/l as vim-style aliases for ←/→ (matching the existing
j/k for up/down), keeping the whole keymap hjkl-consistent. Update the
in-panel hint, help text, docstrings, and offline docs accordingly.
Left/Right now adjust the highlighted value one step along the
OFF ← DEFAULT → ON scale, clamped at the ends (no wrap), complementing
Space which cycles through all states and wraps. Right steps toward ON,
Left toward OFF.
Extract the set/erase side-effect into __config_toggle_apply so Space,
Left, and Right share one implementation of the scope-aware
set -U/-g/-Ue/-eg logic. Update the in-panel keybind hint (now
width-padded via string pad so the border stays aligned) and the help
text and offline docs to cover the new keys.
fish's `read` invokes its interactive line editor on a TTY, which (1)
prints a `read> ` prompt below the panel, (2) intercepts Tab and arrow
keys for its own line editing so they never reach the switch, and (3)
shifts the cursor down a line, throwing off the `\e[14A` redraw so top
borders stacked on every keypress. Plain keys (j/k/q/space) passed
through, masking the problem.
Add __config_toggle_read_key: puts the terminal in raw, no-echo mode
(`stty raw -echo min 1 time 1`), reads one keypress from /dev/tty, and
returns a normalized token (up/down/left/right/tab/space/escape/quit or
the literal char) by decoding the bytes via od. Arrow keys and Tab now
work, there is no stray prompt, and the redraw stays aligned. Ctrl-C in
raw mode arrives as byte 3 and maps to quit; bare Esc exits after the
0.1s inter-byte timer.
Rewrite the event loop to consume these tokens and restore Esc to the
help text.
The event loop used `read -k 1`, but `-k` is not a valid fish read option
(it errors with "unknown option", status 2). read therefore returned
instantly every iteration without consuming a keypress, so the loop
redrew the panel as fast as the terminal could render and ignored all
input. The nchars flag is `-n`, not `-k`.
Switch to `read -s -n 1` (one char, silent so keystrokes don't garble the
panel) and add `or break` so a read failure (EOF / non-tty stdin) exits
cleanly instead of spinning. Applies to the primary read and both escape
sequence continuation reads.
fish's read -k N waits for exactly N bytes; single-char keys ('q', 'j',
Space, Tab) were blocking indefinitely waiting for 2 more bytes, causing
the input loop to appear unresponsive. Random 3-key bundles were then
processed as unrecognised input, triggering infinite redraws.
Switch to read -k 1 (one raw byte per call). Arrow keys still work: the
terminal sends ESC+[+A/B as a burst, so after reading ESC the two
continuation bytes are already in the TTY buffer and the follow-up reads
return immediately. Bare ESC now passes the next keypress through as the
effective key rather than exiting (q/Q remain the exit keys).
Replace two-read-k-1 ESC handling with a single read -k 3 so that a bare
ESC returns immediately instead of blocking the shell indefinitely waiting
for a second byte. Add trap - INT in the cleanup block so the signal
handler does not leak into the global session after config-toggle exits.
rootiest
