219 lines
8.2 KiB
CSV
219 lines
8.2 KiB
CSV
Section / Item,Part Number,Quantity
|
|
Required Tools,,
|
|
600mm (24”) straight edge or level (ruler if no other choice),,1
|
|
300mm (12”) metal machinist scale,Both inch and metric scales,1
|
|
"150mm (6”) calipers, preferably digital","200mm / 8"" as upgrade",1
|
|
Dial indicator (metric or imperial) with mag base & arm,"25mm / 1"" travel",1
|
|
"75mm (3”) machinist square, also 150mm (6”) if available.",Set of 4,1
|
|
123 blocks,with holes,2
|
|
"Step drill up to 1"" / 25mm",,1
|
|
,,
|
|
Main Frame,,
|
|
"3030, 440mm, both ends tapped",HFSB6-3030-440-TPW,2
|
|
"3060, 410mm, both ends tapped",HFSB6-3060-410-TPW,2
|
|
"3060, 295mm, both ends tapped, counterbores",HFSB6-3060-295-TPW-Z8-YA15-YB45-YC140-YD170,2
|
|
"3060, 410mm, both ends tapped, counterbores",HFSB6-3060-410-TPW-Z8-YA120-YB290,2
|
|
"3060, 500mm, both ends tapped, counterbores",HFSB6-3060-500-TPW-Z8-XA120-XB150-YA15-YB485,1
|
|
"3060, 500mm, both ends tapped, counterbores",HFSB6-3060-500-TPW-Z8-XA350-XB380-YA15-YB485,1
|
|
"2020, 235mm, both ends tapped, wrench access holes",HFSB5-2020-235-TPW-Z6-YA50-YB75-YC205-YD230,2
|
|
,,
|
|
Working Enclosure Frame,,
|
|
"2020, 190mm, both ends tapped",HFSB5-2020-190-TPW,2
|
|
"2020, 265mm, both ends tapped",HFSB5-2020-265-TPW,4
|
|
"2020, 469mm, both ends tapped, wrench access holes",HFSB5-2020-469-TPW-LCP-RCP,2
|
|
,,
|
|
Frame Electronics Enclosure,,
|
|
"2020, 380mm, both ends tapped",HFSB5-2020-380-TPW,2
|
|
"2020, 380mm, both ends tapped, wrench access holes",HFSB5-2020-380-TPW-AH20-BH90-CH190-DH360,2
|
|
"2020, 290mm, both ends tapped",HFSB5-2020-290-TPW,2
|
|
"2020, 290mm, both ends tapped, wrench access hole",HFSB5-2020-290-TPW-AH20,2
|
|
"2020, 160mm, both ends tapped, wrench access holes",HFSB5-2020-160-TPW-LCP-RCP,4
|
|
,,
|
|
Linear Rails,,
|
|
"MGN15C LINEAR GUIDE RAIL, 200mm","MGN15, 200mm length, dual compact carriage",2
|
|
"MGN15H LINEAR GUIDE RAIL, 400mm","MGN15, 400mm length, dual carriage",4
|
|
,,
|
|
Motion Components,,
|
|
"SFU1204 ball screw, 250mm",Assembly including BK10 and DSG12H (BF10 not used),1
|
|
"SFU1204 ball screw, 400mm","Complete assembly including BK10, BF10, and DSG12H",2
|
|
Motor drive pulley,"HTD-3M 9mm width, 20 tooth, 5mm or 6.35mm bore (per motor)",3
|
|
Ball screw drive pulley,"HTD-3M 9mm width, 20 tooth, 8mm bore",3
|
|
"X,Y drive belts","HTD-3M 9mm width, closed loop, 189mm long",2
|
|
Z drive belt,"HTD-3M 9mm width, closed loop, 288mm long",1
|
|
"NEMA23 motor, up to 117mm length",LDO 57STH86-3004A,3
|
|
,,
|
|
Machined Parts (see other tab),,
|
|
X Carriage Plate,[mp-a]_x_carriage_plate,1
|
|
X Ballscrew Nut Spacer,[mp-a]_x_nut_block_spacer,1
|
|
Y Ballscrew Front Mount,[mp-a]_y_ballscrew_mount_front,1
|
|
Y Ballscrew Rear Mount,[mp-a]_y_ballscrew_mount_rear,1
|
|
Y Carriage Spacer,[mp-a]_y_carriage_block,2
|
|
Y Ballscrew Nut Spacer,[mp-a]_y_nut_block_spacer,1
|
|
SELECT: Z Carriage Plate (50mm spindle mount),[mp-a]_z_carriage_plate_M6_70x20,1
|
|
SELECT: Z Carriage Plate (65mm spindle mount),[mp-a]_z_carriage_plate_M8_99x25,1
|
|
SELECT: Z Carriage Plate (80mm spindle mount),[mp-a]_z_carriage_plate_M8_80x30,1
|
|
"SELECT: Z Carriage Plate (blank, to be customized)",[mp-a]_z_carriage_plate_blank,1
|
|
,,
|
|
Panels (see other tab),,
|
|
Opaque Frame Panels,"Aluminum or Steel 3mm (1/8"")",
|
|
,[sp-o]_frame_bottom_panel] (470x500),1
|
|
,[sp-o]_gantry_back_panel (468x294),1
|
|
,[sp-o]_gantry_front_brace (168x180),2
|
|
,[sp-o]_gantry_side_brace_panel_left (354x135),1
|
|
,[sp-o]_gantry_side_brace_panel_right (354x500),1
|
|
Clear Working Enclosure Panels,"Polycarbonate 4.5mm or 5mm (3/16"")",
|
|
,[sp-c]_working_enclosure_panel_back_top (468x35),1
|
|
,[sp-c]_working_enclosure_panel_front_side (348x305),1
|
|
,[sp-c]_working_enclosure_panel_front_top (468x210),1
|
|
,[sp-c]_working_enclosure_panel_middle (468x305),2
|
|
Opaque Electronics Enclosure Panels,"ABS / PC / nylon 3mm (1/8"")",
|
|
,[ep-o]_frame_enclosure_panel_back (329x159),1
|
|
,[ep-o]_frame_enclosure_panel_bottom (419x159),1
|
|
,[ep-o]_frame_enclosure_panel_front (329x159),1
|
|
,[ep-o]_frame_enclosure_panel_top (419x159),1
|
|
Smoked Electronics Enclosure Panels,"Smoked Acrylic 3mm (1/8"")",
|
|
,[ep-c]_frame_enclosure_panel_side (380x302),1
|
|
,,
|
|
Work Table Options,,
|
|
Option 1: T-Slot table,,
|
|
T-Slot single sided extrusions,HFSQN4-15100-300 - cheaper option,2
|
|
,,
|
|
Option 2: Machined table,,
|
|
SMW 340x230 Grid Plate,Recommended upgrade - special order,1
|
|
,,
|
|
Spindle Options,,
|
|
Option 1: AC VFD (strongly preferred),,
|
|
G-Penny 1.5kw 24k RPM ER16 spindle with H100 VFD,Package,1
|
|
65mm Spindle clamp with 80x30 bolt pattern,G-Penny provided clamp does not fit,1
|
|
Meanwell LRS-350-48,Stepper motor power supply,1
|
|
"18 AWG (0.75mm^2), 3 core, braided shield, high flex VFD cable",Spindle cable is not provided,2
|
|
,,
|
|
Option 2: DC brushless (discouraged but possible),,
|
|
500W Brushless ER16 (or ER11) Spindle,Commonly bought as package,1
|
|
Meanwell SE-600-48,"<included in package> (dual purpose, spindle + stepper motors)",1
|
|
Spindle Clamp,<included in package>,1
|
|
WS55-220,<included in package>,1
|
|
,,
|
|
Electronics,,
|
|
"60mm Axial Fan, 24V",,1
|
|
"DIN Rail, 350mm",,1
|
|
"DIN Rail, 100mm",,1
|
|
Drag Chain 15x15,2-bolt end connectors,1
|
|
E-Stop Button,"22mm through-hole, 1NO1NC",1
|
|
PowerCON panel connector,Neutrik NAC3MPXXA,1
|
|
PowerCON power cable,"One end Neutrik NAC3FXXA, other end local mains connector",1
|
|
"24V, 30W power supply",Meanwell IRM-30-24ST,1
|
|
"5V, 30W power supply",Meanwell IRM-30-5ST,1
|
|
Inductive end stop,PL-08N or equivalent,3
|
|
"TA35 rocker circuit breaker, 15A",Schurter TA35-CBDWF150C0,1
|
|
"Mini contactor, DIN mounted, 120V or 240V coil voltage","Weg CWC025-00-30V18 (120V), CWC016-01-30V24 (230V)",1
|
|
Sexbolt endstop PCB with included KW10,Part of sexbolt endstop kit,1
|
|
Daylight on a matchstick,,1
|
|
"Flat button, M12 or M16 diameter, with nut","Preferably one each in red, green, and yellow (or white)",3
|
|
KW10 microswitch,Used for door safety switch,2
|
|
Wago 5-conductor,220-415,7
|
|
3D probe - OPTIONAL,Must be normal open,1
|
|
Above table tool setter - OPTIONAL,,1
|
|
Wire,"20awg PTFE, 2m",1
|
|
,"24awg PTFE, 4m",1
|
|
,"14awg PVC, 1m",1
|
|
,,
|
|
Controller Configuration,,
|
|
Option 1: Expatria FlexiHAL + external drivers,,
|
|
Expatria FlexiHAL control board,,1
|
|
DM542T stepper motor controller,,3
|
|
,,
|
|
Option 2: BTT Scylla ,,
|
|
BTT Scylla CNC control board,Motor drivers are included,1
|
|
,,
|
|
Local Management Computer,,
|
|
Raspberry Pi 4+ or better,,1
|
|
"10.1"" touchscreen with VESA 75 mount","1280x800 minimum, HD (1920x1080) preferred",1
|
|
USB-A to USB-C cable,,1
|
|
USB-C to bare wire power cable,Supplemental power for display,1
|
|
"Micro-HDMI to HDMI cable, 0.5m-1m long",Pi to touchscreen with no adapters,1
|
|
180 angle USB-C adapter,,2
|
|
180 angle HDMI adapter,,1
|
|
USB-C keystone,,1
|
|
"USB-C cable, 0.5m",internal cable for keystone,1
|
|
Wireless mini-keyboard - OPTIONAL,Logitech K400 or similar,1
|
|
,,
|
|
Hardware,,
|
|
"Rubber feet, 20mm diameter",GOM-04,6
|
|
"M3 Threaded Insert, Voron spec",,38
|
|
M3 2020 T-Nut,,2
|
|
M3 3030 T-Nut,,60
|
|
M5 2020 T-Nut,,115
|
|
M5 3030 T-Nut,,43
|
|
M6 3030 T-Nut,,82
|
|
M3 Washer,,2
|
|
M4 Washer,,12
|
|
M5 Washer,,19
|
|
M6 Washer,,5
|
|
M8 Washer,,4
|
|
M3 Hex Nut,,3
|
|
M4 Hex Nut,,10
|
|
M5 Hex Nut,,21
|
|
M6 Hex Nut,,8
|
|
M8 Hex Nut,,1
|
|
M5x20 sexbolt / chicago bolt,Part of sexbolt endstop kit,1
|
|
M2x10 Self-tapping Screw,,14
|
|
M3x8 FHCS,,7
|
|
M3x10 FHCS,,2
|
|
M3x10 BHCS,,8
|
|
M4x6 BHCS,,8
|
|
M4x14 BHCS,,18
|
|
M5x8 BHCS,,39
|
|
M5x10 BHCS,,79
|
|
M5x12 BHCS,,13
|
|
M5x16 BHCS,,34
|
|
M5x40 BHCS,,1
|
|
M6x10 BHCS,,85
|
|
M6x16 BHCS,,8
|
|
M8x10 BHCS,,5
|
|
M8x16 BHCS,,4
|
|
M3x8 SHCS,,9
|
|
M3x10 SHCS,,54
|
|
M3x12 SHCS,,65
|
|
M3x20 SHCS,,13
|
|
M3x25 SHCS,,6
|
|
M3x50 SHCS,,1
|
|
M4x6 SHCS,Part of sexbolt endstop kit,1
|
|
M4x16 SHCS,,8
|
|
M5x10 SHCS,,9
|
|
M5x12 SHCS,,22
|
|
M5x16 SHCS,,9
|
|
M5x20 SHCS,,18
|
|
M5x25 SHCS,,6
|
|
M5x30 SHCS,,10
|
|
M5x60 SHCS,,2
|
|
M6x35 SHCS,,11
|
|
M6x40 SHCS,,6
|
|
M6x65 SHCS,"Optional, For 50mm spindle mount",4
|
|
M8x40 SHCS,,20
|
|
M8x70 SHCS,,8
|
|
M8x90 SHCS,"Optional, For 80mm spindle mount",4
|
|
M6x100 threaded rod,,1
|
|
"Precision shim tape, 0.1mm (0.004”) thick, <10mm wide",,1
|
|
Accordion cover 15mmx300mm,Fabric (rubber infused) is preferred over plastic for flexibility.,2
|
|
Loctite 242 or equivalent,,1
|
|
"2mm x 100mm (4"") zip ties",,50
|
|
"2020 extrusion slot cover, 1m section",,3
|
|
"3030 extrusion slot cover, 1m section",,12
|
|
MGN12 rail plugs,Used for X and Z rails only,50
|
|
,,
|
|
Tools for drilling extrusion bed,Only needed if buying raw extrusion bed parts,
|
|
"1/8"" / 3mm drill bit",,1
|
|
3/16 / 5mm drill bit,,1
|
|
,,
|
|
Tools for drilling and preparing extrusions and panels,Only needed if buying raw extrusions and panels,
|
|
"9/64"" / 3.5mm drill bit",,1
|
|
"7/32"" / 5.5mm drill bit",,1
|
|
"21/64"" / 8.5mm drill bit",,1
|
|
M8 counterbore tool,,1
|
|
"9/16"" endmill with 1/2"" shank",Only if M8 counterbore is unavailable,
|
|
M3 tap,,1
|
|
M5 tap,,1
|
|
M8 tap,,1
|
|
Tap handle (if not already owned),,1
|